Overview
SKB's innovative line of ATA Removable Fly Racks have revolutionized the way you travel and protect delicate electronics. Now available in 2U, 3U, 4U, and 10U Shock Rack models!
Our internal Fly Rack frames are made in Orange, California, and are built of high-strength, lightweight aluminum alloy and 11 gauge hot rolled carbon steel rack rails just like SKB Military Grade Shock Racks. The internal frame contains front and rear rack rails with a 10" rack depth. ABS plastic covers the top and bottom of the removable shock rack for added protection when the rack is out of the case. The rack frame easily fits into SKB's iSeries case and is protected by high-quality PE foam that provides space for protruding knobs and buttons. Convenient in-line wheels and push button release pull handle enable easy transport. These iSeries cases are watertight and lightweight (less than half the weight of standard shock racks) making them the perfect solution when flying or shipping delicate equipment.
This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit www.travelsentry.org.
SKB iSeries injection molded waterproof cases are constructed of ultra high-strength polypropylene copolymer resin and feature a waterproof, submersible design (IP67) that is resistant to corrosion and impact damage. Molded-in hinges, TSA acceptable Trigger Latch® System, comfortable snap-down rubber over-molded cushion grip handles, secure stacking, and an automatic ambient pressure equalization valve (MIL-STD-648C) all contribute to their military grade design.
Prop65 Information
This product can expose you to chemicals including carbon black, which is known to the State of California to cause cancer and birth defects or other reproductive harm. To understand why we must make this statement please click on the Prop 65 tab above. For more information on Prop 65, go to www.P65Warnings.ca.gov.
Features
- 10U removable shock rack cage
- 10 inch rack depth
- ABS plastic cover on top and bottom of removable frame
- Interior foam protection
- Ultra high-strength polypropylene copolymer resin construction
- UV, solvent, corrosion, and fungus resistant (MIL-STD-810F)
- Complete gasket seal makes these cases absolutely watertight (MIL-STD-C-4150J)
- Automatic ambient pressure equalization valve (MIL-STD-648C & IP67)
- Molded-in hinges
- This case comes with Travel Sentry® Approved locking latches installed. Using Travel Sentry® Approved locks allows your luggage to be opened, inspected, and relocked by TSA authorities without damage. For more information, visit www.travelsentry.org.
- Convenient push button release pull handle and in-line wheels for easy transport
- Rubber over-molded cushion grip handles
- Locking loops to accommodate a customer supplied lock
Specifications
Exterior : Hard :
Built In Wheels or Casters : Yes :
Rack Units : 10 :
Rail To Rail : 10 in : 25.40 cm
Front Wall To Rail : 1.75 in : 4.45 cm
Right Wall To Rail : 1.375 in : 3.49 cm
Left Wall To Rail : 1.375 in : 3.49 cm
Back Wall To Rail : 1.5 in : 3.81 cm
Acc Slot Length : 17.5 in : 44.45 cm
Acc Slot Width : 17.5 in : 44.45 cm
Acc Slot Height : 1 in : 2.54 cm
Product Weight : 34.42 lb : 15.61 kg
Exterior Length : 24.81 in : 63.02 cm
Exterior Width : 24.98 in : 63.45 cm
Exterior Height : 14.15 in : 35.94 cm
Carton Length : 25.5 in : 64.77 cm
Carton Width : 25.5 in : 64.77 cm
Carton Height : 15 in : 38.10 cm
Shipping Weight : 37.27 lb : 16.90 kg