Overview
Wireless that works as hard as you do. The SLXD15+85M system brings wireless freedom, system control, and world-class Shure audio to your in the field mobile audio productions. Standing on the shoulders of Shure's venerable SLXD platform, the SLXD+ carries the torch of trouble-free wireless audio production forward.
Its 24-bit digital audio engine captures every detail with transparent precision using the full 118 dB dynamic range to produce a faithful reproduction of any source. RF performance stays locked in, even when the spectrum gets crowded, thanks to ShowLink®, your invisible assistant that scans, updates, and manages interference before you even notice. And with mobile monitoring, your phone becomes a command center, giving you oversight from anywhere on set or in the field.
At the core is the SLXD5+ portable receiver, a powerhouse designed for mobility. Clip it to your camera or drop it in your audio bag, and let it deliver long-range UHF transmission with the kind of stability professionals trust. The set also includes an SLXD1+ bodypack with an WL185m lavalier for discreet capture. Each piece is engineered for resilience, from reinforced connectors to the low-profile lavalier that resists sweat and makeup. Every detail speaks of reliability, every feature designed for the realities of mobile production.
Applications
- Mobile event production
- House of worship
- Mobile A/V
- Electronic news gathering
- Broadcast
Features
- 24-bit digital audio with >118 dB dynamic range
- >118 dB dynamic range and 2.8ms latency
- 138 MHz wide-tuning range for greater
- geographical coverage
- Up to 11 compatible systems per 6MHz TV band;
- 14 systems per 8 MHz band
- ShowLink® Ease for remote control and management of transmitter wireless parameters from the mix
- position and elsewhere
- Patented Shure Digital Feedback Reducer software embedded in every SLX-D+ receiver
- AES-256 Encryption included, for complete
- and secure peace of mind
- Portable receiver & plug-on transmitter options
- Single, Dual, and Quad rack receiver options; bodypack and handheld transmitter options
- Remote control via WWB mobile app for SLXD4+, SLXD4D+, SLXD4Q+, SLXD4QDAN+, and SLXD5+
- Up to 8 hours from 2 AA batteries or optional Shure SB903 rechargeable battery
Specifications
- System
- RF Carrier Frequency Range: 470–937.5 MHz Varies by Region. See Frequency Range and Output Power Table.
- Working Range: 100 m (328 ft) Note: Actual range depends on RF signal absorption, reflection and interference.
- RF Tuning Step Size
- JB Band: 125 kHz
- All Other Bands: 25 kHz
- Varies by region.
- Image Rejection: >85 dB typical
- RF Sensitivity: −97 dBm at 10-5 BER
- AUDIO
- Latency: 2.8 ms
- High-Pass/Low Cut Filter: 160 Hz, –12 dB/octave Note: factory default is for the HPF to be off
- Audio Frequency Response: 20 Hz–20 kHz (+1, −2 dB)
- Audio Dynamic Range A-weighted, 20 Hz–20 kHz, typical: 118 dB @1% THD
- Total Harmonic Distortion: <0.02%
- System Audio Polarity
- XLR: Positive pressure on microphone diaphragm produces positive voltage on pin 2 with respect to pin 3 of XLR output.
- TRS: Postive pressure on microphone diaphragm produces positive voltage on thetip of the 6.35 mm (1/4-inch) with respect to the ring of the 6.35 mm output.
- Mic Offset Range: 0 to 21 dB (in 3 dB steps)
- TEMPERATURE RANGE Note: Battery characteristics may limit this range.
- Operating Temperature Range: 0 °F to 122 °F (−18 °C to 50 °C)
- Storage Temperature Range: −20 °F to 165 °F (−29 °C to 74 °C)
- SLXD5+
- RF INPUT
- Spurious Rejection: >75 dB Typical
- Impedance: 50 Ω
- Phantom Power Protection: Yes
- Antenna Type: 1/4 Wave Whip
- AUDIO OUTPUT
- Audio Frequency Response: 20 Hz – 20 kHz (+1, -3 dB)
- Connector Type: 1/8" (3.5 mm), ×2
- Configuration
- Balanced (Mono): Tip=audio +, Ring=audio –, Sleeve=ground
- Dual Mono: Tip = left, Ring = Right, Sleeve = Ground
- Impedance (Camera)
- Balanced (Mono) Line: 450 Ω
- Balanced (Mono) Mic: 240 Ω
- Dual Mono Line: 400 Ω
- Dual Mono Mic: 200 Ω
- Full Scale Output
- Camera (Balanced Line): 15 dBV
- Headphone: 13 mW @ 64 Ω Load
- Dimensions (H × W × D): 4.21 × 2.68 × 1.0 in (107 × 68 × 25.3 mm)
- Weight: 1.8 lb (182 g)
- Housing: Aluminum
- Power Requirements
- Battery: Rechargeable Li-Ion or 1.5 V AA batteries
- Power Supply: SBC-DC-903 Battery
- Eliminator, or 5 VDC via USB-C
- RF INPUT
- SLXD1+
- Battery Type: Rechargeable Li-Ion or 1.5 V AA batteries
- Dimensions (H × W × D): 3.86 × 2.68 × 1.0 in (98 × 68 × 25.5 mm)
- Weight: 3.1 oz (89 g)
- Housing: PC/ABS
- AUDIO INPUT
- Connector: 4-Pin male mini connector (TA4M)
- Configuration: Unbalanced
- Impedance: 1 MΩ
- Maximum Input Level: 8.2 dBV (2.57 Vrms, 7.27 Vpp)
- Preamplifier Equivalent: Input Noise (EIN) –118 dBV
- RF OUTPUT
- Antenna Type: 1/4 Wave
- Occupied Bandwidth: <200 kHz
- Modulation Type: Shure Propietary Digital
- Power: 1 mW/10 mW Varies by region.