Microflex® Modular Install Sound > Install Microphones > Gooseneck microphones deliver unsurpassed style flexibility and performance for conference rooms and similar applications. Offering desktop or mounted bases wired or wireless options and even interchangeable Live Sound > DJ Equipment > Cartridges it’s easy to get the perfect fit for your conferencing installation. Fully compatible with SLX® Wireless Systems when used with MX890 Wireless Desktop Base.
C = Cardioid S = Supercardioid N = No Cartridge
Features:
•Available in 5" (12.7 cm) 10" (25.4 cm) and 15" (38.1 cm) lengths
•Cardioid and supercardioid polar patterns
•Bi-color status indicator or single color light ring
•Programmable mute switch (desktop models only)
•Logic input/output for remote LED and mute control
•Surface-mount and wired or wireless desktop base options
•CommShield® Technology for improved RF filtering
Mounting Options:
•MX400DP: Desktop Base for MX405 MX410 and MX415 models
•MX890: Wireless Desktop Base for MX405 MX410 and MX415 models
•MX400SMP: Surface Mount Preamp for MX405 MX410 and MX415 models
Available Options:
MX415/C MX415/S 15" (38.1 cm) Install Sound > Install Microphones > Gooseneck includes surface mount preamp bi-color status indicator (cardioid or supercardioid polar pattern)
MX415R/N 15" (38.1 cm) Install Sound > Install Microphones > Gooseneck includes surface mount preamp light ring (no microphone cartridge)
MX415LP/C MX415LP/S 15" (38.1 cm) Install Sound > Install Microphones > Gooseneck less preamp bi-color status indicator (cardioid or supercardioid polar pattern)
MX415RLP/N 15" (38.1 cm) Install Sound > Install Microphones > Gooseneck less preamp light ring (no microphone cartridge)
Specifications
|
Type |
Condenser (electret bias) |
|
Frequency Response |
50 to 17000 Hz |
|
Polar Pattern |
Cardioid polar pattern (at 1 kHz) |
|
Output Impedance |
EIA Rated at 150 ? (170 ? actual) |
|
Configuration |
Output: Active balanced |
|
Sensitivity |
-35 dBV/Pa (18 mV) / at 1 kHz, open circuit voltage |
|
Maximum SPL |
121 dB (1 kHz at 1% THD, 1 kW load) |
|
Output Noise |
28 dB SPL (A-weighted) |
|
Signal-to-Noise Ratio |
66 dB (referenced at 94 dB SPL at 1 kHz) |
|
Dynamic Range |
93 dB (1 k? load at 1 kHz) |
|
Common Mode Rejection |
45 dB minimum (10 Hz to 100 kHz) |
|
Polarity |
3-Pin XLR: Positive sound pressure on diaphragm produces positive voltage on pin 2 relative to pin 3 of output XLR connector |
|
Attenuation |
Mute Switch: -50 dB minimum |
|
Connections |
LED IN: Active low (?1.0 V); TTL compatible; Absolute maximum voltage: -0.7 V to 50 V |
|
Power Requirements |
48 to 52 VDC phantom, 8.0 mA |
|
Operating Temperature |
0 to 135? |
