The Microflex® Multi-Element Install Sound > Install Microphones > Boundary microphone delivers a unique and versatile tool for conference room installations. Clean and simple in appearance Multi-Element Install Sound > Install Microphones > Boundary mics come in two or three element configurations combining the coverage of multiple microphones into one small compact package.
•End of table (300°) center of table (360°) or cross table (bidirectional) coverage patterns
•Individual audio output for each element
•Bi-color status indicator
•Programmable mute switch
•Logic input/output for remote LED and mute control
•CommShield Technology
Specifications
| Transducer | Condenser (Electret Bias) |
| Polar Pattern | Cardioid |
| Frequency Response | 50Hz to 17kHz |
| Dynamic Range (Typical) | 94dB |
| Signal-to-Noise Ratio | 66dB |
| Maximum Input Sound Level | 122 dB |
| Power Requirements | MX396/C-DUAL: 48-52 Vdc phantom, 10.0 mA |
| Output Impedance | EIA Rated at 150 ohm (170 ohm actual) |
| Output Connectors | 20' (6.1m) attached unterminated cable with three shielded audio pairs and three shielded conductors for logic control. |
| Pad | No |
| Low Frequency Roll-Off | No |
| Dimensions | 4.3 x 4.3 x 0.1" (109.2 x 109.2 x 2.54mm) |
| Weight | 1.29 lbs (0.587 kg) |
| Packaging Info | |
|---|---|
| Package Weight | 2.05 lb |
| Box Dimensions (LxWxH) | 10.3 x 6.1 x 3.4" |
