Shure CVB-B/C
Centraverse Cardioid Low Profile Install Sound > Install Microphones > Boundary Condenser Microphone Attached 12' Cable Black
Applications:
- Conference/Installed
- Conference Tables
- Lecterns/Altars
- Meeting Rooms
Form Factor: Install Sound > Install Microphones > Boundary
Model Line: Centraverse
Designed for desktop-installed sound reinforcement applications Centraverse™ Install Sound > Install Microphones > Boundary Condenser Microphones seamlessly
fit within any design aesthetic. They offers low-profile discreet placement for corporate facilities houses of
worship government institutions and beyond.
Featuring Commshield® Technology which guards against unwanted RF interference from portable wireless devices
Centraverse microphones deliver in best-in-class performance and reliability.
Features
- Available in cardioid or omnidirectional polar patterns
- CommShield® Technology that guards against unwanted RF interference from portable wireless devices (smartphones etc.) and high resistance to intense nearby radio signals
- Available in black with attached 12’ XLR cable
- Frequency response ideal for capturing fast transients in a wide variety of locations including podiums and desktops
- Superior Shure design and rugged dependable construction
Specifications
|
Cartridge Type |
Electret condenser |
|
Polar Pattern |
Cardioid |
|
Frequency Response |
70 to 16,000 Hz |
|
Output Impedance |
180 ? |
|
Sensitivity |
At 1 kHz, open circuit voltage: -32.5 dBV/Pa (23 mV) 1 Please Note:1 Pa = 94 dB SPL close |
|
Maximum SPL |
1 kHz at 1% THD: 120 dB SPL 2 Please Note:THD of microphone preamplifier when applied input signal level is equivalent to cartridge output at the specified SPL close |
|
Signal to Noise Ratio |
Referenced at 94 dB SPL at 1 kHz: 67 dB 3 Please Note:S/N ratio is the difference between 94 dB SPL and equivalent SPL of self noise, A-weighted close |
|
Dynamic Range |
93 dB |
|
Self Noise |
Equivalent SPL, A-weighted (typical): 27 dB SPL |
|
Common Mode Rejection |
>45 dB (10 Hz to 100 kHz) |
|
Clipping Level |
Preamplifier Output: At 1 kHz, 1% THD: -7 dBV |
|
Polarity |
Positive pressure on diaphragm produces positive voltage on pin 2 with respect to pin 3 |
|
Power Requirement |
11 to 52 VDC, 2.0 mA 4 Please Note:All specifications measured with a 48 VDC phantom power supply. The microphone operates at lower voltages, but with slightly decreased headroom and sensitivity. close |
|
Operating Temperature Range |
0 to 135 |
