OVERVIEW
Hands-free performance. Go for XS WIRLESS 1 and rely on a solid wireless transmission with up to 10 compatible channels in a stable UHF band. The XS WIRELESS 1 HEADMIC SET is an easy to use all-in-one wireless system for singers and presenters, excellent for live sound that involves dancing and singing all at the same time. The set includes an intuitive stationary receiver for quick setup and hassle-free handling, as well as a compact bodypack transmitter and a lightweight headset microphone.
FEATURES
-
Lightweight headmic and compact bodypack transmitter
-
Antenna-switching diversity reception
-
Integrated antennas
-
Automatic frequency management and synchronization via remote channel for easy setup
-
Selectable UHF frequencies within a large bandwidth
-
Up to 10 compatible channels
WHAT'S IN THE BOX?
- 1 receiver EM-XSW 1
- 1 headset microphone ME 3-II
- 1 bodypack transmitter SK-XSW
- 1 power supply NT 12-5 CW
- 2 AA batteries
SYSTEM
Modulation | Wideband FM |
Frequency Range | A: 548 to 572 MHz |
Switching Bandwidth | Up to 24 MHz |
Signal to Noise Ratio | ≥ 103 dBA |
Total Harmonic Distortion | ≤ 0.9% |
Temperature Range | Operation: 32 to 104°F (0 to +40°C) |
Storage | -4 to 158°F (-20 to 70°C) |
Transmitter Synchronization | 2.4 GHz, Low Power OQPSK (only active during synchronization) |
RECEIVER
Principle | Double superheterodyne |
Diversity | Antenna switching diversity via internal antennas |
Sensitivity | < 3 μV at 52 dBA RMS S/N (at peak deviation) |
Frequency Response | 50 Hz to 16 kHz (-3 dB) |
Max Output Voltage | At Peak Deviation, 1 kHz AF 1/4" (6.3 mm) Jack Socket (unbalanced): +6 dBu XLR Socket (balanced): +12 dBu |
Adjustment Range | Audio: 45 dB, adjustable in 5-dB steps |
Power Supply | 12 VDC nominal, 300 mA |
Squelch | Adjustable from 3 dBμV to 28 dBμV (combined with pilot tone) |
Line/Mic Level | 20 dB, switchable |
Material of Construction | ABS housing |
Dimensions (W x H x D) | 7.9 x 1.7 x 5.0" (200 x 42 x 127 mm) |
Weight | 12 oz (340 g) |
BODYPSCK TRANSMITTER
Output Power | 10 mW |
Frequency Response | Line: 50 Hz to 16 kHz Mic: 50 Hz to 16 kHz |
Audio Input | 1/8" (3.5 mm) jack socket |
Input Voltage | Mic/Line at 3% THD: Typ. 1.V RMS mic / typ. 2.6 V RMS line at -30 dB gain |
Power Supply | 2 x AA batteries, 1.5 V |
Operating Time | Approximately 10 hours |
Adjustment Range | Transmitter Sensitivity: 0 to -30 dB, adjustable in 10 dB steps |
Material of Construction | Rugged ABS housing |
Dimensions (W x H x D) | 2.8 x 3.8 x 1.1" (71 x 96 x 28 mm) |
Weight | 3.4 oz (95 g) |
HEADSET
Microphone Type | Condenser, pre-polarized |
Sensitivity | 1.6 mV/Pa |
Polar Pattern | Cardioid |
Max SPL | 150 dB |