Overview
The WMS-300L Wall Mount Speaker Station is part of a series of user stations especially designed to work within the TW (Two-Wire) Intercom System. It fits directly into a standard 4-gang electrical conduit box (2.25 inch deep). The rear section is not enclosed and uses the back-box to provide a housing when installed.
This user station is perfect for permanent installations where a wall-mounted station can provide an unobtrusive operating position. Most often it is located where the operator can conveniently attend to on-going operations while wearing a headset or listening to the loudspeaker. Typically, the WMS-300L is a very practical user station since it can operate in an open-listening mode with the panel-mounted loudspeaker as well as privately with a headset or a handset.
Features
- Two-channel select wall mount speaker user station. Can be used as a "public" listen box via built in speaker or privately through the headset connection. Features channel select switch, call light, speaker on/off switch and dual purpose volume control.
- Fits in standard US 4-gang outlet box.
Specifications
- Headset Connector: Dynamic Microphone, XLR type 4- or 5-pin connector version available.
- Line Connector: Screw Terminals.
- Dimensions: 4.50 in (114.30 mm) H, 8 in (44.5 mm) W, 1.75 in (44.45 mm) D.
- Weight: 1 lb (0.45 kg).
- Finish: Light gray enamel paint.
- Power Consumption;Quiescent: 10 to 40 mA, Operating: speaker: 125 mA, Operating: speaker + call light: 150 mA.
