Overview
The RadioCom BTR-800 UHF-synthesized wireless intercom systems offer the ultimate in reliable, high-performance, high fidelity full-duplex communications. The BTR-800 system includes the BTR-800 frequency-agile base station, working with up to four TR-800 or TR-825 frequency-agile beltpacks. The BTR-800 base station provides full-duplex communications with the beltpacks. The BTR system incorporates two audio channel operation, permitting the beltpack operator to choose between two separate audio channels of communications, with the base station tracking the beltpack selection. This allows the user the flexibility to create a party line and a private line within the same beltpack. The BTR-800 system is perfectly suited for stand-alone operation and can interface with Audiocom, RTS Two-Wire Intercom, Clear-Com as well as RTS Digital Matrix Intercom systems and other four-wire communications systems. In addition to the external intercom systems interfaces listed above, the system provides connections for auxiliary balanced audio input and output, as well as wireless talk-around (WTA) and stage announce (SA) features. The RadioCom BTR series has been designed for reliable, efficient operation. Operating in the 470 to 740 MHz range, the units operate reliably at line-of-sight distances of 1,000 feet. With available antenna systems, from RadioCom, the effective operating range can be extended.
- Backlit Base Station LCD allows the user to easily monitor the beltpack’s status
- Base Stations are Table or Rackmountable
- Beltpack units contained in a weather and shock resistant die cast magnesium case
- ClearScan Function automatically finds the best channels on which to operate
- Compatible with Audiocom, RTS, Clear-Com, & Other Wired Intercom Types
- Convenient IEC Power Connector on the Base Station
- Frequency-Agile Base Station & Beltpacks
- Full Duplex (Simultaneous Talk & Listen) Operation
- Relay Contract Closure on the Base when the SA Button is Pressed
- SA (Stage-Announce) Beltpack Control
- TR-825 Features Two Audio Channel Binaural Operation in Either Stereo or Mono Mode
- Two Channels of Intercom Audio
- WTA (Wireless Talk About) Beltpack Control
Specifications
- Frequency Band of Operation: 470 - 608 MHz, 614 - 740 MHz in 18 MHz TX and RX bands
- Transmit Power: 100 mW Max. (High), 10 mW (Normal)
- Power Requirements: 100-240 VAC, 50-60 Hz, IEC receptacle
- Wireless Technology: UHF
- Form Factor: Rackmount
- Type: Two Synthesized Transmitters, 712 channels each
- 4-Wire Input and Output: Level Adjustable (2 Vrms typical)
- Auxiliary Input: Adjustable (2 Vrms typical)
- Auxiliary Output: Adjustable (2 Vrms typical into 600Ω)
- Microphone Input Sensitivity: 9
- Local Headset Output: 40 mW output into 600Ω (1% Distortion)
- Modulation Type: FM
- Deviation: 40 kHz (35 kHz Europe)
- Storage Temperature: -4°F to 130°F (-20°C to 55°C
- RF Frequency Stability: 0.005
- Modulation Limiter: Peak-Responding Compressor
- User Capacity: 4
- RF Frequency Range: 470 - 608 MHz, 614 - 740 MHz in 18 MHz TX and RX bands
- Battery Type: Standard Alkaline Batteries
- FCC ID: B5DM514
- Battery Life: 12 hrs
- Stage Announce Output: Internally Adjustable (2 Vrms typical at rated deviation)
- Frequency Response: 300 Hz-8 kHz
- Stage Announce Relay: Dry contact, rated at 1 Amp, 24V Max
- Antenna: ½ Wave (supplied), TNC Male Connector (TX and RX)
- Radiated Harmonics and Spurious: Exceeds FCC specifications
