Rolls RM64
Four Zone Mixer
The ROLLS RM64 Four Zone Mixer combines two paging microphones with up to four line level source inputs. Each input is switch selected to output to any combination of four zone outputs. The outputs are all balanced XLR connectors and a 1/4" Remote Volume jack provides each zone with the means for external volume control. The Microphone inputs feature automatic ducking for easy paging. The RM64 is the ideal solution for banquet rooms offices restaurant/night clubs etc.
Features:
- Two Mic Inputs with Trim Controls.
- Four RCA source inputs.
- Four Balanced XLR Zone Outputs.
- Automatic paging.
- Remote Volume for each output.
Specifications:
| Input Impedance | Mic: 10 kOhms (Balanced) RCA: 50 kOhms (Unbalanced) |
| Output Impedance | 50 ohms (Balanced XLR) |
| Maximum Input Level | Mic: +10dB Source: +22dB |
| Phantom Power | +12VDC |
| Inputs | 2 x XLR Female 4 x RCA Stereo Pairs |
| Outputs | 4 x XLR Male |
| Controls Front Panel | 1 x Power Switch 4 x Zone Level Control Knobs 4 x Source Input Level Control Knobs 16 x Source Zone Selector Switches 2 x Mic Level Control Knobs 8 x Mic Zone Selector Switches |
| Controls Rear Panel | 2 x Mic Trim Controls 2 x Phantom Power On/Off Switches 4 x Ducking Switches |
| Maximum Input Gain | 60dB Mic 30dB Line |
| Signal to Noise Ratio | Greater than 75dB |
| Total Harmonic Distortion (THD) | Less than 0.3% |
| IMD | Less than 0.3% |
| Common Mode Rejection Ratio | 90dB |
| Frequency Response | 20Hz - 20kHz |
| Power | 120VAC, 50-60Hz, 15W |
| Dimensions (WxHxD) | 19 x 1.75 x 6.5" (483 x 45 x 165mm) |
| Weight | 7 lbs (3kg) |
