Rolls RM424
Switchable Four Zone Mixer
The ROLLS RM424 Four Zone Mixer combines two paging microphones with two line level source inputs. Each input is switch selected to output to any combination of four zone outputs. The outputs are all balanced XLR connectors Remote Volume provides each zone with the means for external volume control. The Microphone inputs feature selectable ducking for paging. Front panel speaker makes pre assignment monitoring for each channel possible with individual switching for each channel. The RM424 is easy for anyone to use from the front but from the rear it is just complex enough it will fill even the most demanding four zone installation requirements. With the included external power supply the RM424 has just about every approval known to man so you can spec it in almost any installation. The RM424 is the ideal solution for restaurants offices night clubs etc.
Features:
- Two Mic Inputs with independent switchable phantom power
- True 48V phantom power
- Two RCA source inputs and one front panel 3.5mm stereo input
- Four Balanced XLR Zone Outputs
- Remote Volume for each output
- Assignable automatic paging
Specifications:
| Inputs | |
|---|---|
| Input Connections | 1 x XLR - Mic 1 1 x XLR - Mic 2 2 x RCA phono - Channel 2 (1 x L/R) 4 x RCA phono - Source Inputs (2 x L/R) 1 x 1/8" TRS stereo - Channel 4 |
| Input Impedance | XLR Mic: 600Ω balanced XLR Line: 10kΩ balanced RCA phono: 10kΩ unbalanced 1/8" TRS: 10kΩ unbalanced |
| Maximum Input Level | Mic: -30 dB Line: +22 dB |
| Phantom Power | Yes, +48V |
| Outputs | |
|---|---|
| Output Connections | 4 x XLR |
| Output Impedance | 50Ω balanced |
| Maximum Gain | Mic: 60 dB Line: 30 dB |
| Headphone Output | 1 x 1/4" |
| Internal Speakers | Yes, 1 monitor speaker |
| Performance | |
|---|---|
| Remote Control Connector | 2 x euroblock for remote volume on each output zone |
| Signal-to-Noise Ratio | > 75 dB |
| THD | < 0.3% |
| IMD | < 0.3% |
| CMRR | 60 dB |
| Frequency Response | 20 Hz to 20 kHz |
| General | |
|---|---|
| Power Adapter | 15VDC |
| Dimensions (W x H x D) | 19 x 1.75 x 6.5" (48 x 4.5 x 17 cm) |
| Weight | 7 lb (3 kg) |
