Overview
The P2110-T is a weatherproof full range, wide-dispersion, coaxial two way loudspeaker system offering substantial power and efficiency for a variety of professional indoor or outdoor applications.
Features- Cabinet is a single piece rotational moulded in medium density polyethylene, fully UV protected and waterproof IP 55
- Front grille in custom perforated aluminium with open-cell fibres and water repellent woven fabric backing
- Stainless steel bracket
- One 10" high-output LF transducer with 2" voice coil
- One RCF Precision 1" Compression Driver with 1.5" voice coil
- 90° x 40° constant directivity horn
- Built in passive crossover and selectable line transformer
- 10° X 20° enclosure sides for array configurations
- Active Mosfet Compression Driver Protection
- LICC (Low Impedance Compensated Crossover) network
- 12 brass suspension points (M8)
General
- Acoustical Specifications
- Frequency Response -10 dB: 95 Hz ÷ 20000 Hz
- Max SPL @ 1m: 124 dB
- Horizontal coverage angle: 90°
- Vertical coverage angle: 40°
- Directivity index; Q: 11
- System Sensitivity: 95 dB
- Nominal Impedance: 16 Ω
- Power Handling: 200 W
- Peak Power Handling: 800 W
- Recommended Amplifier: 400 W
- Protections: Dynamic
- Crossover frequencies: 2000 Hz
- Transducers
- Compression Driver: 1" HF driver, 1,5" voice coil
- Nominal Impedance: 8 Ω
- Input Power Rating: 25 W AES
- Sensitivity: 106 dB
- Woofer: 10" woofer, 2.5" voice coil
- Nominal Impedance: 16 Ω
- Input Power Rating: 180 W AES
- Sensitivity: 95 dB
- Input Section
- Input connector: 5m, 4-adriges Neopren Kabel
- Constant voltage transformer: 70/100
- Power Selection: 70V/30W, 15W, 100V/60W, 30W
- Cabinet
- Cabinet Material: Polyethylene rotomoulded
- Hardware: 12 x M8 inserts+ U-brackets and pair of spacers
- Grille: Custom perforated aluminium grille with open-cell fiber and water repellent woven fabric backing
- Colour: Grey
Physical & Dimensions
- Height: 350mm
- Width: 350mm
- Depth: 320mm
- Weight: 13.5kg
