Overview

The P 1108T is a weatherproof full range, two-way speaker, suitable for a variety of professional indoor or outdoor applications. The high-frequency section includes a constant directivity CMD horn-loaded enclosure with a 1.4" voice coil RCF Precision neodymium compression driver for smooth, highly-controlled coverage. The low-frequency section features a 8" woofer with a 1.5" voice coil. The P 1108T also features a selectable line transformer for 100 V applications, with built-in LICC crossover, and Active Mosfet Compression Driver Protection (AMCDP). The single-piece rotomolded cabinet is fully UV protected and is equipped with M8 (4x) brass inserts and one electroplated steel U-bracket. The horn can be rotated, allowing the loudspeaker to be installed either vertically or horizontally. The aluminum grille cover is powder coated with a water-repellent backing material, and a rotatable logo plate. The P 1108T meets IP 55 standard requirements (International Protection Rating).

Features

• 100 W RMS power handling
• 121 dB max SPL
• 80 Hz ÷ 20000 Hz frequency range
• 8" woofer, 1.5" v.c.
• 1.4" v.c. neodymium compression driver
• 90° x 60° constant directivity
• Weatherproof IP55 cabinet with UV protection
• Aluminum grille
• Built in 100V line transformer

Specifications

Acoustical:

• Frequency Response -10 dB: 80 Hz ÷ 20 kHz
• Max SPL @ 1m: 121 dB
• Horizontal coverage angle: 90°
• Vertical coverage angle: 60°
• Directivity index; Q: 11
• System Sensitivity: 95 dB
• Nominal Impedance: 16 Ohms
• Power Handling: 100 W
• Peak Power Handling: 400 W
• Recommended Amplifier: 200
• Protections: Dynamic protection on Compression Driver
• Crossover frequencies: 2200 Hz

Transducers:

• Compression Driver: 1" throat, 1.5" coil diaphragm assembly
• Nominal Impedance: 8 Ohms
• Input Power Rating: 20 W AES
• Sensitivity: 107 dB
• Woofer: 8" woofer, 1.5" voice coil
• Nominal Impedance: 16 Ohms
• Input Power Rating: 100 W AES
• Sensitivity: 94 dB

Input Section:

• Input connector: 4 x 1.5 mm square 2 m Neoprene cable
• Constant voltage transformer: 70/100
• Power Selection: 70V/30W, 15W - 100V/60W, 30W

Cabinet:

• Cabinet Material: 8 mm roto-molded Polyethylene
• Hardware: 4 x M8 + U-Bracket and Pair of spacers
• Grille: Custom perforated aluminium grille with open-cell fiber and waterrepellent woven fabric backing
• Color: Gray

Physical:

• Dimensions: 10.47" H x 19.4" W x 9.84" D (266 x 493 x 250)
• Net Weight: 27.55 lbs (12.5 kg)