Overview3.5-inch, inside/outside copper voice coil 1300W continuous program power handling 100 dB Sensitivity 40 Hz – 3 kHz Frequency range Dual-forced air ventilation for minimum power compression Dual spider design with silicon based dampening control Specifications
This MB15N351 is designed to provide an excellent linearity in the frequency response with low distortion. The transducer is built around a very stronger neodymium magnetic structure and a new 3,5” voice coil, this combination provides to increase the power handling especially in comparison a standard 3" voice coil. The unique Dual-forced air venting system guarantee a very efficient voice coil ventilation for minimize the power compression at the higher power handling.
Features General specifications
Nominal Diameter : 15 inch / 381 mm
Rated Impedance : 8 ohm
Program Power (watt) : 1300 W
Power handling capacity : 650 W
Sensitivity : 100.0 dB
Frequency range : 40 - 3000 Hz
Effective piston diameter : 330 mm / 12.99 inch
Max. Excursion Before Damage : 39 mm / 1.54 inch
Minimum Impedance (ohm) : 6.8 ohm
Voice Coil Diameter : 3.5 inch / 89 mm
Voice Coil Winding Material : Copper
Voice Coil Length : 17 mm / 0.67 inch
Number of layers : 2
Kind of layers : inside/outside
Top Plate Thickness : 11 mm / 0.43 inch
Cone Design : Curved
Surround Material : Polycotton
Surround Design : M-roll
Magnets : Neodymium
Dual-force air ventilation : Yes
Spider : 03
Thiele - small parameters
Resonance frequency (Fs) : 42 Hz
DC resistance (Re) (ohm) : 5.60 ohm
Mechanical factor : 4.00 Qms
Electrical factor : 0.24 Qes
Total factor : 0.22 Qts
Bl factor (Bl) (T x m) : 22.50 T x m
Effective moving mass (Mms) : 80.0 g
Equivalent Cas air loaded (Vas) : 191.0 liters
Effective piston area (Sd) : 0.090 m2
Max. linear excursion (Xmax) : 6 mm
Voice coil inductance @ 1kHz (Le1k) : 1.65 mH
Half-space efficency (Eff) : 5.68%
Mounting information
Overall diameter : 393 mm / 15.47 inches
Bolt circle diameter : 371-376 mm / 14.61-14.8 inch
Bolt hole diameter : 7 mm / 0.28 inch
Front mount baffle cut-out : 354 mm / 13.94 inch
Rear mount baffle cut-out : 354 mm / 13.94 inch
Volume occupied by the driver : 3.8 liters / 0.15 ft3
Standard compliance
Safety agency : CE compliant
Size / Weight
Height : 180 mm / 7.09 inches
Diameter : 393 mm / 15.47 inches
Weight : 5.16 kg / 11.38 lbs
Shipping information
Package Height : 230 mm / 9.06 inches
Package Width : 440 mm / 17.32 inches
Package Depth : 440 mm / 17.32 inches
Package Weight : 6.52 kg / 14.37 lbs
