Overview3-inch, fibreglass inside/outside aluminium voice coil 1000W continuous program power handling 97.5 dB Sensitivity 55 Hz – 3.5 kHz Frequency range Dual-forced air ventilation for minimum power compression M-roll surround and exponential cone geometry Specifications
The MB10N305 is a hypervented neo, high linearity mid-bass. The magnetic structure is powered by a large neodymium magnet that provides an extremely high flux density in the gap. The new hyper-vented aluminium basket and magnetic assembly design provide an excellent heat dissipation and lower power compression. Special airforced ventilations are provided for voice coil, magnet assembly and basket. M-roll surround and spider design offer great linearity and precise reproduction.
Features General specifications
Nominal Diameter : 10 inch / 254 mm
Rated Impedance : 8 ohm
Program Power (watt) : 1000 W
Power handling capacity : 500 W
Sensitivity : 97.5 dB
Frequency range : 55 - 3500 Hz
Effective piston diameter : 210 mm / 8.27 inch
Max. Excursion Before Damage : 34 mm / 1.34 inch
Minimum Impedance (ohm) : 6.9 ohm
Voice Coil Diameter : 3.0 inch / 76 mm
Voice Coil Winding Material : Aluminum
Voice Coil Length : 14 mm / 0.55 inch
Number of layers : 1
Kind of layers : inside/outside
Top Plate Thickness : 10 mm / 0.39 inch
Cone Design : Curved
Surround Material : Polycotton
Surround Design : M-roll
Magnets : Neodymium
Hypervented magnetic structure : Yes
Spider : 01
Thiele - small parameters
Resonance frequency (Fs) : 60 Hz
DC resistance (Re) (ohm) : 5.60 ohm
Mechanical factor : 4.00 Qms
Electrical factor : 0.24 Qes
Total factor : 0.23 Qts
Bl factor (Bl) (T x m) : 18.50 T x m
Effective moving mass (Mms) : 37.0 g
Equivalent Cas air loaded (Vas) : 31.0 liters
Effective piston area (Sd) : 0.040 m2
Max. linear excursion (Xmax) : 5 mm
Voice coil inductance @ 1kHz (Le1k) : 0.90 mH
Half-space efficency (Eff) : 2.90%
Mounting information
Overall diameter : 260 mm / 10.24 inches
Bolt circle diameter : 241-246 mm / 9.49-9.69 inch
Bolt hole diameter : 6 mm / 0.24 inch
Front mount baffle cut-out : 234 mm / 9.21 inch
Rear mount baffle cut-out : 234 mm / 9.21 inch
Volume occupied by the driver : 1.4 liters / 0.06 ft3
Standard compliance
Safety agency : CE compliant
Size / Weight
Height : 126 mm / 4.96 inches
Diameter : 260 mm / 10.24 inches
Weight : 3.2 kg / 7.05 lbs
Shipping information
Package Height : 169 mm / 6.65 inches
Package Width : 289 mm / 11.38 inches
Package Depth : 289 mm / 11.38 inches
Package Weight : 3.8 kg / 8.38 lbs
