Overview
The TS-1D is intended to protect audio input and output circuits from the effects of transients induced on the audio lines.
Features
- Immunity from Electrostatic Discharge
- Immunity from Induced Transient Voltage
- Immunity from RF Interference
- Immunity from Electromagnetic Pulse
- CE Compliance
Specifications/
AUDIO | |
| Frequency Response | 10 Hz to 50 kHz (± 0.25 dB) |
| Insertion Loss | <0.3 dB (into balanced bridging input), <1.0 dB (into 150 ? or 600 ? balanced< input), < 6 dB (600 ? balanced source into 600 ? load) |
ELECTRICAL | |
| Number of Circuits | 4, independent (for connection as 4 unbalanced or 2 balanced audio lines) |
| Equivalent Series Resistance, Input to Output | 20 ? |
| Equivalent Circuit | 300 kHz LP filter, 6 dB/octave, integral shunt high-voltage switch |
| Maximum Working Signal | 30 Vp, 60 V p-p |
| HV Switch Clamp | 24 V actuation; 48 V maximum |
| Transient Energy | 0.1 joule |
PHYSICAL | |
| Case Material | Electromagnetically inert plastic composition |
| Size | 1.75 in. W x 2.5 in. L x 0.9 in. H (4.45 cm x 6.35 cm x 2.29 cm) (including terminal strip) |
| Ground Bus (integral) | 110 alloy copper, 0.25" W x 1.6" L (.64 cm x 4.1 cm) with 2 mounting holes, #6 (.37 cm) clearance, mounting hardware included |
| Input/Output Termination | #6 (.35 cm) captive screw terminals |
| Package Type | Cardboard Box |
| Package Dimensions | 2 x 2 x 4 in. |
| Shipping Weight | 0.245 lbs. |
| WEEE weight | 0.185 lbs. |
| Tariff code | 8518.40.2000 |
