RDL ST-RG1

RDL ST-RG1

RDL-ST-RG1

RDL ST-RG1

Ramp Generator-0 to 10 Vdc Output

SKU: RDL-ST-RG1
MSRP: $208.76
MAP: $156.57

Overview

The ST-RG1 is a digitally generated 0 to 10 volt Ramp Generator which provides the ideal interface for audio volume control from multiple points with the ST-VCA3. Any number of Up and Down buttons may be connected to the ST-RG1. Sufficient drive is provided from the ST-RG1 to control up to six ST-VCA3s.
Features include:

    VCAs may be controlled from several locations with the optional D SERIES-RLC2 Remote Level Control. LED level indicator driver circuitry is included in the ST-RG1 for visual indication of relative level.

Features

  • Ramp Generator with 0 to 10 Volt Output
  • Remote Control of ST-VCA3 modules
  • Multiple VCA Remote Control Points
  • Pushbutton Up / Down Ramp Control
  • Dual LED Outputs for Position Indication
  • Ramp Output Capable of Driving Six VCAs
  • Buffered, De-Bounced Switch Inputs

Specifications

Control Inputs1 to ramp up, 1 to ramp down
Input LogicExternal closure pulls normally low input to +15 Vdc to activate UP or DOWN function
Indicator Outputs1 to drive red LED (partial to fully OFF)
1 to drive green LED (partial to fully ON)
LED Output Current0 to 3 mA (to drive low current, high intensity LEDs)
Ramp Output0 to 10 volts nominal, (typical < 0.1 V to > 9.8 V under ST-VCA3 load)
Minimum Step200 mV nominal
Ramp Time5 seconds nominal (fully off to fully on; or fully on to fully off)
Ambient Operating Environment0° C to 55° C
Power RequirementGROUND-REFERENCED, 24 Vdc @ 40 mA
Package TypeCardboard Box
Package Dimensions2 x 2 x 4 in.
Shipping Weight0.21 lbs.
WEEE weight0.155 lbs.
Tariff code8518.29.0000