Overview
The ST-LCR1 provides double-pole, double-throw dry switching contacts and LED indicator for relay closure. The ST-LCR1 provides momentary operation and is ideally suited where additional switching contacts are needed to be added to nearly any type of control signal.
Features
- Add Contacts to Any Control Signal
- Activation from Logic Circuits
- DPDT Switching Relay
- Open-Collector Switching
- Control from Switch, Button or Logic Circuits
Specifications
Control Inputs | SLAVE terminal used as an input from remote push-button or switch turns on relay when that switch is on. Activation is by connecting this input to Ground. Input from other equipment's open-collector output turns relay on when open-collector is on. Note: RDL switching STICK-ONs have open-collector outputs suitable for driving an ST-LCR1. 5V+ accepts 3.5 to 12 Vdc to turn on relay. Relay is on only when this control signal is applied. 24V+ accepts 12 to 35 Vdc to turn on relay. Relay is on only when this control signal is applied. |
Control Output | SLAVE terminal open-collector @ 25 mA suitable to drive indicators or slave LCRs |
Switching Contacts | Double-pole, double-throw |
Maximum Switching Power | 60 W (220 Vdc, 125 Vac, 2 A) |
Ambient Operating Environment | -10° C to 55° C |
Power Requirement | GROUND-REFERENCED, 24 Vdc @ 50 mA * * Assumes 20 mA max load at SLAVE output |
Dimensions | Height: 0.7 in. (1.7 cm), Width: 3 in. (7.6 cm), D... |
Package Type | Cardboard Box |
Package Dimensions | 2 x 2 x 4 in. |
Shipping Weight | 0.185 lbs. |
WEEE weight | 0.135 lbs. |
Tariff code | 8536.49.0050 |