RDL SF-BNC2

RDL SF-BNC2

RDL-SF-BNC2

RDL SF-BNC2

Bidirectional Unbalanced Stereo Audio Network Interface-Dante

SKU: RDL-SF-BNC2
MSRP: $892.97
MAP: $669.73

Overview

The SF-BNC2 is a bidirectional Dante audio network interface. It features two unbalanced audio inputs (left and right) on RCA or stereo 3.5 mm Mini-jack connectors, as well as two unbalanced audio outputs (left and right) on RCA and stereo 3.5 mm Mini-jack connectors. Special software is not required to configure the SF-BNC2. Each input provides a network digital audio level of -20 dBFS for an unbalanced -10 dBV input. Each output provides -10 dBV unbalanced for a network digital audio level of -20 dBFS. The SF-BNC2 is a professional grade product for studio quality fidelity and low noise performance.

The SF-BNC2 is PoE powered. Valid PoE power and synchronization to the Dante network is indicated by a green LED visible from the front of the unit.

The SF-BNC2 is constructed in a durable, professional all-metal enclosure suitable for free-standing, surface-mounted or rack-mounted operation. This full-featured SYSFLEX® product is engineered and manufactured in the U.S.A for continuous duty in demanding installations. The versatility of SYSFLEX® products adds enormous flexibility in the design and installation of professional A/V systems.

Features

  • Dante Network Interface for Two Audio Inputs and Two Audio Outputs
  • Inputs and Outputs on Front-Panel RCA Jacks and Stereo 3.5 mm Mini-Jacks
  • Selectable Dante Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz
  • Converts Two Unbalanced Line-Level Audio Sources to Dante Network Channels
  • Converts Two Dante Network Audio Signals to Unbalanced Line Level
  • Special Software Not Required for Module Setup
  • Exceptional Low-Noise and Low-Distortion Performance
  • High Resolution 24 Bit Digital to Analog Conversion
  • Legendary RDL Analog Filtering Enhances Superb Audio Performance
  • LED Indicator for Valid Power and Network Sync
  • Operation from PoE Power (Class 0, IEEE 802.3af)
  • Equipped for SysFlex® Rack Mounting or Surface Mounting

Specifications

Network ConnectorRJ45 with Link and Speed indicators
Digital Audio Ethernet ProtocolDante
Transmission Rate100 Mbps
Sample Rates Supported44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz
Bit Depth Supported24 bits
Audio Operating Level-20 dBFS = -10 dBV
Reference Level0 dBFS = +10 dBV

Line Inputs to Network Interface
Inputs (4)Mini-jack Stereo or RCA jacks (2, L and R)
Input Level (for +4 dBu/-20 dBFS)-10 dBV nominal
Input Level (maximum)+10 dBV
Input Impedance> 15 k?
Frequency Response20 Hz to 20 kHz (± 0.5 dB)
Noise below -20 dBFS (20 to 20 kHz)< -80 dB
Crosstalk< -85 dB (L into R, R into L, 20 Hz to 20 kHz)
THD+N< 0.05% (20 Hz to 20 kHz, -20 dBFS); 0.02% at 1 kHz (typ)
Headroom20 dB

Network to Line Outputs
Outputs (4)Mini-jack Stereo or RCA jacks (2, L and R)
Output Level (operating)-10 dBV nominal
Output Level (maximum)+10 dBV
Output Impedance40 ?
Frequency Response20 Hz to 20 kHz (± 0.5 dB)
THD+N< 0.1%
Noise< -75 dB (below -10 dBV)
Crosstalk< -70 dB (20 Hz to 20 kHz)
Headroom above -10 dBV20 dB

Indicators (3)

Ethernet Link and Speed (2, rear panel); Sync (front panel)
Ambient Operating Environment0° C to 50° C
Power RequirementPoE Class 0, IEEE 802.3af
Specification ConditionsGain/Level: ± 1 dB; Source termination: 150 ?; A to D values measured in digital domain
Dimensions2.79" (7.09 cm) W; 1.68" (4.27 cm) H; 5.77" (14.66 cm) D
Package TypeCardboard Box
Package Dimensions7 x 4.375 x 2.25 in.
Shipping Weight1.115 lbs.
WEEE weight0.905 lbs.
Tariff code8517.18.0050