Overview
The EZ-MXA20 is a stereo mixer amplifier with one mic input and two line inputs. Bass and treble tone controls are included. An integral compressor/limiter allows a higher sound output level without clipping than is possible using a standard amplifier. The output drives 4 or 8 ohm speakers. The EZ-MXA20 is used in houses of worship, restaurants, clubs, meeting rooms and commercial sound systems.
Features
- Audio Amplifier with Mic and Line Input Mixer
- 10 Watts RMS Per Channel into 8 Ω
- 8 Watts RMS Per Channel into 4 Ω
- Switch-Selectable Load Impedance on Rear Panel
- Balanced Microphone Input on XLR
- Unbalanced Line Inputs on RCA Jacks
- Switch-Selectable Phantom on Mic Input
- Bass and Treble Tone Control Equalization
- Integral Overload Limiter with LED Indicator
- Limiter Controls Overloads from Clipping
Specifications
| Inputs (3) | 1.2 k? balanced on XLR jack, mic-level, -55 dBu Min. (for 10 W out), -11 dBu max.(1) > 10 k?, -10 dBV nominal on RCA jacks, -13 dBV Min. (for 10 W out), +22 dBV max. (2) |
| Gain | Off to 74 dB (mic), Off to 32 dB (line) |
| Outputs (2) | Left and Right, 10 Watts RMS into 8 ? per channel or 8 Watts RMS into 4 ? per channel, switch-selectable output impedance |
| Equalization | ±10 dB @ 10 kHz, ±9 dB @ 80 Hz |
| Frequency Response | 50 Hz to 20 kHz (±1.5 dB, mic input, 10 Watts), 35 Hz to 20 kHz (±1.5 dB, line input, 10 Watts) |
| THD+N | < 0.25% |
| CMRR | > -55 dB (mic) |
| Crosstalk | < -68 dB (1 kHz, line input) |
| Phantom | Switch-selectable 24 V (IEC 61938: 2013) |
| Noise | < -70 dB (below 10 Watts, -10 dBV line input), < -65 dB (below 10 Watts, -50 dBu mic input) |
| 24 Vdc power supply current | 170 mA (idle), 1000 mA (max.) |
| Case dimensions | 5.75” (14.6 cm)W x 5” (12.7 cm)D |
| Mounting size | 1/3 rack width |
| Package Type | Cardboard Box |
| Package Dimensions | 9.5 x 7 x 2.25 in. |
| Shipping Weight | 1.435 lbs. |
| WEEE weight | 1.015 lbs. |
| Tariff code | 8518.50.0000 |
