Radial Eng SB-15 Tailbone

Radial Eng SB-15 Tailbone

Radial Eng SB-15 Tailbone

Radial Eng SB-15 Tailbone

Combination buffer and 2x9V to 15V converter for Tonebones

SKU: RAD-R800 0115
MSRP: $120.00
MAP: $99.99

Overview

The Stagebug SB-15™ is a class-A signal buffer designed to sit at the beginning of the signal chain and drive multiple pedals without added noise or signal loss. It also converts two 9V power outputs to a 15V supply as an alternative way to power Radial and Tonebone 15V products.

The Radial StageBug SB-15 is a combination hi-Z signal buffer and DC power adaptor for pedalboards. It features a 100% discrete class-A signal path for optimal signal transfer and is augmented with Drag Control load correction to match the source pickup with the pedal chain. Once connected, the SB-15 lowers the impedance and susceptibility to noise, enabling longer cable runs without noise. For Tonebone users that require a 15DVC supply, the SB-15 incorporates a DC to DC converter that converts two 9V supply lines from a typical power brick to 15 volts.

Features

  • 100% discrete class-A signal buffer
  • Drag control load correction for natural tone
  • Drives pedal chains up to 15 meters (50ft)
  • Converts two 9V supplies to 15V output

Specifications

Audio circuit type: Class A FET buffer
Frequency response: 20Hz to 30Khz
Dynamic range: 104dB with dual 9V supply; 98dB with single 9V supply
Gain: 0dB (unity gain)
Clip Level: +16dBu
Total harmonic distortion: 0.01% @ 1kHz
Intermodulation Distortion: 0.004%
Phase Deviation: <5° at 20Hz
Input Impedance: 22K to 500K
Output Impedance: 4.7K
Noise: -88dBu
Maximum Input: +16dBu
Features
Drag Control
Input Connectors: Standard 2.1mm barrel with center negative (-)
Output Connectors: Standard 2.1mm barrel with center positive (+)
Extras: Dual 9VDC 400mA for optimal performance – May be used with single 9VDC 100mA supply to power buffer only
General
Construction: 14-gauge steel
Size (L x W x D): 4.5" x 1.85" x 1.35" (114mm x 47mm x 34mm)
Weight: 0.55lb (0.25kg)
Shipping size (L x W x D): 8" x 5" x 3" (203mm x 127mm x 76mm)
Shipping weight: 0.65 lbs (0.3kg)
Power: +15V DC 400mA
Conditions: For use in dry locations only between 5°C and 40°C
Warranty: Radial 3-year, transferable