Overview
The Attero Tech by QSC unDX4I is a cost-effective multi-IO Dante network audio I/O wall plate, featuring four balanced mic/line XLR inputs and two balanced line outputs on a Phoenix connector. Designed to fit into most dual gang US junction boxes, the unDX4I is PoE enabled, so all connectivity (power and data) is provided by a single CAT-5 cable. The unDX4I’s size and I/O density make it easy to put Dante connectivity wherever it’s needed - near the audio source or sink - thereby eliminating costly and interference prone analog wiring.
Features
- Dante Domain Manager ready
- Four balanced XLR mic/line inputs
- Two balanced line outputs on Phoenix depluggable connectors
- PoE powered
- Three software-adjustable input gains accommodate common line levels, phantom power and dynamic microphones.
- +48 V phantom power per channel
- Q-SYS Extension allows for drag-and-drop integration into your
- Q-SYS design
Audio Inputs
- Input types: 4x XLR (balanced and RF filtered)
- Gain: -18 dB, -3 dB, +25 dB and +40 dB, software selectable
- Maximum input level: +20 dBu @ -18 dB gain,
+6 dBu @ - 3 dB gain,
-23 dBu @ +25 dB gain
-38 dBu @ +40 dB gain - Phantom power: +48 V, software selectable
Audio Outputs
- Output type: Two balanced line level with automatic muting on loss of Dante signal on 3-pin depluggable Phoenix
- Attenuation range: Software controlled volume (0 to -60 dB, 1 dB increments)
- Maximum output levels: +20 dBu at 0 dB attenuation
Dante Network
- Physical level: Standard ethernet
- Connector: Single RJ-45
- Cable quality: CAT-5e or higher
- Transmission speed: 100 Mbps
- Supported sample rates: 44.1 kHz, 48 kHz
General
- PoE: 802.3af PoE PD compliant
- Dimensions (HWD): 4.2 x 3.5 x 2 in (114.3 x 88.9 x 50.8 mm)
- Decora wall plate (2-gang): 4.87 x 4.94 x 0.08 in (123.7 x 125.48 x 2.03 mm)
- Weight: 0.6 lb (.27 kg)
