Overview
The Attero Tech by QSC Synapse D32i is a high-performance, networked audio interface supporting Dante with AES67 interoperability. The D32i features 32 channels of balanced line level inputs, capable of accommodating line level consumer and/or professional analog audio devices. All inputs are available independently for routing from the Dante / AES67 network audio interfaces
Features:
- 32 line level balanced inputs
- High performance analog-to-Dante conversion on terminal block connectors
- Software-selectable pad can be configured for professional (+4 dBu) or consumer (-10 dBV) input levels for each
- 16 channel input bank.
- Front panel offers network audio level control
- Available Q-SYS control plugin – no programming required
Specifications
| Analog Line Inputs |
 |
| Maximum input level |
+24 dBu (pad active - Line mode) |
| Input impedance |
10k Ω |
| Input type |
3-pin depluggable terminal block |
| Headphone Output |
 |
| Connector |
1/4 in TRS jack |
| Controls |
mute / volume encoder |
| Load |
32 Ω minimum |
| Audio Networking |
 |
| Protocol support |
Danteâ„¢ with AES67 support |
| Channel count |
32 Dante TX, 2 Dante RX |
| Modes |
Switched or Redundant mode |
| Ports |
2 - Gb copper on RJ-45, 2 - Gb SFP |
| General |
 |
| Dimensions (HWD) |
1.75 x 19 x 12.5 in
(44.5 x 482.6 x 5080 mm) |
| Weight |
6 lb (2.72 kg) |
