Overview
The Attero Tech by QSC Axon D2FLEXio provides cost-effective analog audio connectivity for integration into network AV systems such as the Q-SYS Ecosystem. Each analog audio I/O features a selectable switch to assign input or output audio connectivity. This flexibility provides a single product solution for cost-effective analog audio conversion to and from any Dante/AES67 system.
Features:
- Dual analog flex I/O, selectable via recessed slide switches (2x0, 1x1, 0x2)
- I/O trim potentiometers for accommodating professional and consumer audio line levels
- 44.1, 48, 88.2, 96 kHz, 24 bit audio conversion to and from a Dante network
- Supports Dante Domain Manager
- Small form factor with integrated mounting tabs
- PoE or DC powered
- Retrofit connectivity for non-networked AV equipment to and from a Dante or AES67 audio network, including:
- Power amplifiers and powered speakers
- Wireless microphone receivers
- In-ear monitor transmitters
- Electronic instruments and DJ equipment
- Mixers, DSPs and other audio signal processing gear
Specifications
| Audio Inputs (when selected) | |
| I/O type | 2x switchable balanced and RF filtered 3-pin de-pluggable terminal blocks |
| Maximum Input levels | 0 dBu to +24 dBu line-level (pad attenuation 0 to -24 dB |
| Dynamic range | >= 100 dB (20 - 22 kHz) |
| Audio Outputs (when selected) | |
| I/O type | Two switchable Balanced and RF filtered 3-pin de-pluggable |
| Maximum Output Level | 0 dBu to +24 dBu (0 to +24 dB gain range) |
| Dynamic Range | >= 95 dB (20 - 22 kHz) @ any output gain |
| Dante/AES67 Network | |
| Physical layer | Ethernet |
| Connector(s) | RJ-45 |
| Cable quality | CAT-5e or greater, UTP |
| Supported bit rates | 16, 24 |
| Supported sample rates | 44.1 kHz, 48 kHz (default), 88.2 kHz, 96 kHz |
| AES67 support | AES67, SAP based stream discovery |
| Power | |
| PoE power | 802.3af Class 0 |
| General | |
| Dimensions (HWD) | 1 x 6.5 x 2.6 in (25.4 x 16 x 66 mm) |
| Weight | 0.65 lb (0.29 kg) |
