Overview

The E110 is a compact, two-way loudspeaker with a 10-inch, die cast frame woofer with a 2.5-inch voice-coil housed in a multi-purpose enclosure that’s at home in stage monitor or main PA deployment. It incorporates QSC’s Directivity Matched Transition® (DMT) design with a wide 85° coverage. When used as a stage monitor, the E110 is angled up at a 55° angle allowing it to be placed near the performer when used on a crowded stage.

E Series loudspeakers will perform very well with any quality, professional power amplifier – but by taking advantage of the complete E Series Entertainment System, more performance and options are available. Today’s powered loudspeakers rely on finely tuned digital signal processing (DSP) to achieve a higher level of performance. When used with QSC GXD or PLD amplifiers or with a QSC TouchMix digital mixer, E Series loudspeakers can also take advantage of advanced DSP. QSC has developed E Series DSP settings for all three platforms. These settings support a variety of applications including live sound reinforcement (with and without subwoofers), stage monitoring, dance music and karaoke.

Features

• High output, professional quality sound with 300 W continuous power
  
• E Series Entertainment System – Advanced digital signal processing tunings and options using QSC GXD, PLD amplifiers or TouchMix digital mixers.
  
• E Series Entertainment System DSP Tunings are now available for PLD, CXD and GXD processing amplifiers:
  
   - For PLD/CXD visit Amplifier Navigator Software
  
   - For GXD visit the GXD Firmware Updater
  
  
• Rugged tour-grade textured paint
  
• Foam-lined perforated steel grill
  
• Suitable for main PA and stage monitor
  
• Available U-Style Yoke and M8 rigging kit for permanent installation
  
• Dual angle pole socket

Specifications

• Model : E110
  
• Configuration : 1 × 10-inch, 2-way, non-powered
  
• Frequency Response (-6 dB) : 68Hz – 20kHz
  
• Frequency Range (-10 dB) : 50Hz - 20kHz
  
• Power capacity²: continuous/peak : 300 W / 1200 W
  
• Sensitivity : 95 dB, 1 W @ 1 m
  
• Coverage Angle : 85° conical DMT™
  
• Output1 (Peak SPL @ 1m) : 126 dB
  
  
• Drivers
  
  LF  : 254 mm (10 in) driver with 64 mm (2.5 in) voice coil;
  HF  : 25 mm (1 in) exit, 45 mm (1.75 in) voice coil, compression driver
  
  
• Nominal Impedance : 8Ω
  
• Cross-over : Full-range only, 1.8 kHz
  
• Input Connections : 2 × NL4, 1 × barrier strip
  
• Enclosure : Multi-angle plywood, black texture paint finish. One top-mounted handle. Perforated, powder-coated steel grille with foam lining.
  
• Mounting and suspension : 9 × M8 suspension points, dual angle, 35 mm pole-socket
  
• Speaker Dimensions (W×H×D)  : 330 × 560 × 330 mm & 13 × 22 × 13 in
  
• Carton Dimensions (H×W×D) : 430 × 430 × 660 mm & 17 × 17 × 26 in
  
• Net speaker weight : 20 kg / 44 lb
  
• Shipping weight : 23 kg / 50 lb