2-channel x 350W low and high impedance int DSP WiFi hotspot class D
Specifications
- Power output per channel: 175W @ 2Ω, 350W @ 4Ω, 350W @ 8Ω, 350W @ 70V/100V
- Inputs: 2 channels with user selectable 26dB and 34dB input sensitivity
- THD+N: 0.1% (20Hz – 20kHz)
- Frequency Response: 20Hz to 20kHz +/-0.5dB (4Ω, 8Ω, 70V, 100V), -2.5dB @ 20kHz for 2Ω
- Signal to Noise level: 105dB (20Hz to 20kHz referenced to 8Ω)
- Crosstalk: 70dB (20Hz to 20kHZ)
- DSP Architecture: Analog Devices Sigma 06kHz DSP processor with 32-bit Core with sample rate converters
- Amplifier Output Classification: Class D with proprietary Smart Power Bridge Technology allowing bridged output function without sacrificing and amplifier channel
- Crossovers: up to 48dB/octave IIR filters (Linkwitz, Riley, and Butterworth
- Input Matrix: Routable matrix, any input to any output with primary and secondary input priority
- Output Delay: 100ms per channel
- Parametric EQ 8-band parametric EQ per channel
- Output Protection: DC, VHF, and AC mains protection, overtemp and current limiter, fan fault detection
- User Adjustable Limiting: Peak voltage and RMS voltage
- Load Monitoring: Realtime Load Monitoring, and pilot tone detection from internal or external sources
- User Interface: Web browser interface, user interface, or CLOUD control
- External I/O: External I/O in toggles remote on/off, external I/O out indicates amplifier health
- Power Supply: Universal switch mode power supply with Power Factor Correction
- AC Mains: 100VAC – 240VAC +/-15% 50Hz or 60Hz
- Dimensions: 14.25” x 19” x 1RU (362mm x 482mm x 1RU)
- Weight: 10 lbs. (3.5 kg), Shipping weight: 17.4 lbs. (7.9 kg)
- Cooling: Front to rear variable fan speed cooling. Fan noise at 1m: 50dB at idle, 57dB at 50%, 63dB at full speed
