Overview
Forge a new sound with the DJM-V10; a new breed of mixer, born of fresh thinking. It’s built to allow the most creative DJs to craft original soundscapes.
This 6-channel unit – loaded with unique features – produces warm audio full of energy and presence. So, take full control of your mix and get ready to create something the crowd has never heard before – either performing solo or back-to-back with another DJ.
Features
-
Elite sound quality
Feel the warmth of the mixer’s natural sound and hear every detail in the music. We’ve adopted studio-quality 96-kHz/64-bit mixing and dithering processing within the DSP, as well as 32-bit high-quality A/D and D/A converters. All of this, plus the low-jitter clock circuit, helps produce a full low-end that’s complemented by vibrant mids and precise highs. -
Six channels
Choose your ideal setup and plug in everything from CDJs and turntables to samplers, synths, and drum machines. To make setup easy, the analog input terminals line up with each channel on the top panel, so you’ll always know where to connect your cables when you’re in the booth.4-band EQ
Sculpt your sound just the way you like with the newly developed 4-band EQ. The frequencies, curves, and boost and cut amounts on each band have all been specially designed to give you total flexibility. Completely isolate the high and/or low and tweak the two mid ranges – which have their own custom curves – to fine-tune your mix. -
New filter with dedicated knob on each channel
Drastically change the sound of a track or make tiny adjustments using the newly developed filter with resonance control. Switch on high or low pass by pressing either button, then turn the knob from all the way to the left (no filter applied) to the furthest position on the right (maximum filter applied). Because the high and low pass are separated, the entire range of the knob is dedicated to the option you choose, giving you twice the resolution to play with compared to the filter on the DJM-900NXS2. This means you can make much more nuanced adjustments to the effect. - Send/return section
Send audio to one of four built-in FX and up to two pieces of external equipment to create unique sounds and even live remixes. You can connect a variety of units to the TRS jack send/return terminals such as guitar pedals, FX units, and more.The built-in send/return FX are Short Delay, Long Delay, Dub Echo, and Reverb. With parameter knobs at your fingertips, you can further tweak the FX as follows:- Size/Feedback: changes the room size when using a reverb, and the feedback amount when using delays and echoes.
- Time: adjusts the decay time of the reverb and the delay time for delays and echoes.
- Tone: changes the hue of the effected sound, making it deep and heavy or light and crisp.
- Master Mix Level: acts as the overall volume of the effected sound when Master Mix is turned on.
-
band master isolator Effortlessly control the tone of your entire mix using the 3-band master isolator, which features new boost/cut curves and adjustments to the crossover frequencies and other parameters. Grab the large dials and hype up the crowd by drastically changing the sound.
-
Compressor knob on each channel
If you want to play old or unmastered tracks but you’re worried they’ll be overwhelmed by the loudness of music made with modern production techniques, the DJM-V10 has the solution. Turn the compressor knob on the relevant channel and the mixer will “beef up” the audio in real time. The quieter the track, the more pressure is added, boosting the sound of “weaker” tracks and having a minimal effect on mastered music. -
Dual headphones output and booth EQ
Plug in your headphones at the same time as another DJ and enjoy independent monitoring. Each headphones output has its own Cue/Master Mix control and level adjustment knob so you can choose what you want to hear as you prepare to take over the decks, or during back-to-back sets. And, with booth EQ, you can tweak the sound from the monitor speakers to prevent ear fatigue during long sets.
Specifications
-
Width 437.6 mm
Height 107.9 mm
Depth 467 mm
Weight 11.9 kg
Frequency Range 20 - 40000 Hz
Sampling Rate 96 kHz
A/D Converter 32 bit
D/A Converter 32 bit
S/N Ratio Line 105 dB
S/N Ratio Phono 88 dB
S/N Ratio Mic 79 dB
Distortion < 0.005 % (LINE)
ESS Technology 32-bit D/A converter
A 32-bit SABRE 8-channel DAC (ESS Technology’s ES9016S) is used for both the master and booth outputs. The DAC output is driven in parallel to further improve S/N. To maximize the DAC’s capability, we’ve honed the output circuit by improving operation amps and capacitors and performing optimal tuning. This results in a sound that’s low-noise, high-resolution, and easy to listen to – even at high volume.
32-bit A/D converter by Asahi Kasei Electronics
The analog channel inputs use a 32-bit premium ADC (AK5578EN/AK5574EN) with VELVET SOUND technology by Asahi Kasei Electronics. By redesigning the input differential conversion circuit and optimizing the audio parts used, we’ve created a rich, high-definition and low-distortion sound.
EM Device mechanical relays
The line/phono input switch, master output, and headphones output circuit use high-performance, highly durable mechanical relays (EA2 relays) from EM Devices Co. They eliminate signal distortion due to the use of non-linear electrical components, completely cancelling unpleasant noise in the mute circuit.
AES/EBU output
The master outputs feature a noise-resistant balanced transmission system and a professional digital audio-standard AES/EBU terminal that’s suitable for long-distance transmission in large venues. This means you can deliver audio to the audience without degrading it.
