Overview

Features

• Two-way full range speaker with 15-inch LF driver and a 1.4-inch compression driver.
• Passive crossover board features separate cooling zones to ensure safe and continuous operations in the toughest environments.
• Wide dispersion of 90 × 60 degrees, with rotatable horn for horizontal installation.
• Designed for fixed and mobile applications, with a wide array of flying options.
• Features top hats for quick set-up.
• NL4 INPUT and LINK OUT connections as standard.
• Robust enclosure made from premium multi-laminate birch plywood.
• Impact resistant textured paint finish.

Specification

• Enclosure Type: Two-way passive, reflex-loaded
• Frequency Response: 50 Hz to 20 kHz
• Sensitivity (1 W/1 m): 98 dB
• Nominal Impedance: 8 Ω
• Power Handling: 650 W RMS, 1300 W Program
• Maximum SPL: 126 dB cont., 132 dB peak
• Dispersion: 90 °H × 60 °V, Rotatable
• Driver Configuration: 15 inch (380 mm) neodymium LF cone driver,
                                 1.4 inch (36 mm) exit neodymium HF                                                  compression driver
• Crossover: Asymmetric internal passive crossover
• Connectors: 2 × Neutrik SpeakON™ NL4
• Dimensions (W×H×D): 440 mm × 715 mm × 444 mm
                                   (17.3 inch × 28.1 inch × 17.5 inch)
• Weight: 29 kg (63.9 lbs)
• Rigging and Hardware: 8 × M10 threaded mounting points (4 top/4                                         bottom),
                                   3 × M10 threaded mounting points on rear,
                                   4 × M10 threaded mounting points on                                                side (2 left/2 right),
                                   4 × M8 threaded points on rear                                                          (for wall mount bracket),
                                   2 × flush handles (1 left/1 right),
                                   1 × 35 mm polemount socket
• Grille: Hex punched steel
• Enclosure: 15 mm (0.6 inch) birch plywood
• Finish: Impact-resistant, Black semi-matt textured
• Suggested Power Amplifier: Recommended : K3DSP
• Minimum : M30DHDSP
• Accessories: polemount socket cover
                     (-W model only)