Overview
NXAEDT
Digital Inputs extension card for NXAMPmk2
Not compatible with first-generation NXAMPmk1
Key Features
- Adds both AES/EBU and DanteTM inputs to NXAMPmk2 Powered Controllers
- 4 channels of DanteTM inputs with Switched/Redundant mode and 44.1 kHz to 96 kHz digital audio support
- 2 channels of AES/EBU inputs with buffered outputs and 44.1 kHz to 96 kHz digital audio support
- Highly flexible 4 ports gigabit switch with 4 different configuration modes
- Remote control ports configurable as separate network or from the DanteTM network
Specifications
|
DIGITAL AUDIO 1 INPUT FORMAT |
|
|
Digital Audio type |
DanteTM networks |
|
Media type |
Standard TCP/IP over 1minimum 100 Mb / recommended 1 Gb ethernet network |
|
Number of channels |
4 channels from up to 4 different DanteTM devices |
|
Resolution |
24 bits |
|
Sample Rate |
44.1, 48, 88.2 or 96 kHz |
|
Latency |
0.25 ms to 5.0 ms (typical 1 ms) |
|
DIGITAL AUDIO 2 INPUT FORMAT |
|
|
Digital Audio type |
AES/EBU |
|
Media type |
110 Ohms 3 wires twisted pair with XLR connector |
|
Number of channels |
2 |
|
Resolution |
24 bits |
|
Sample Rate |
44.1, 48, 88.2 or 96 kHz |
|
Latency |
<0.07 ms |
|
REMOTE CONTROL FORMAT |
|
|
Network format |
Standard TCP/IP |
|
Device addressing |
Automatic, based on IP address with Zeroconf |
|
FRONT PANEL FEATURES |
|
|
Digital audio 1 input/link connectors |
4x shielded 1 Gb RJ45 connectors |
|
Digital audio 2 input/link connectors |
1x XLR-F and 1x XLR-M buffered output with fail safe relay |
|
LEDs on network ports |
Link/Activity (Green) and Gigabit (Orange) |
|
GENERAL SPECIFICATIONS |
|
|
Height x Width x Depth (Net) |
40mm x 120mm x 170mm (1.6” x 4.7” x 6.7”) |
|
Height x Width x Depth (Gross) |
56mm x 166mm x 225mm (2.2” x 6..5“ x 8.9”) |
|
Weight (Net) |
160 g |
|
Weight (Gross) |
300 g |
|
Operating temperature range |
0° C - 40 °C (32° F - 104° F) |
|
Storage temperature range |
-20° C - 60° C (-4° F - 140° F) |
|
SYSTEM OPERATION |
|
|
Compatible Host |
NXAMPmk2 Powered TD Controllers |
