Overview
Nexo eLS18 18-Inch Passive Install Subwoofer, 1750W @ 8 Ohms
The Nexo eLS18 18-Inch Passive Install Subwoofer uses a high excursion 18-inch driver in a cabinet constructed in a bass-reflex design. Constructed from 15mm baltic birch plywood, the cabinet is protected by a strong polyurethane based coating and the Magnelis front grille is covered by a black UV and fire resistant cloth. Acheiving a peak SPL of 138dB with a frequency range extending down to 32Hz, the eLS18 features convenient rigging points and two pairs of In/Out connectors on pitch screw terminal blocks with an IP cover.
Features
- Installation sub with high-excursion 18-inch woofer
- Ideal companion to ePS12 installation loudspeaker
- Compact design that can be stacked or flown with ePS12 companion main speaker
- Discrete, easy to integrate design
- Solid construction using 15mm birch plywood enclosure
- IP55 protection level
- Comprehensive range of accessories for deploying the eLS18 in a wide variety of applications
Specifications
- Frequency Response @-6 dB: 32 Hz to 150 Hz
- Sensitivity 1W@1m: 106 dB SPL Nominal
- Peak SPL@1m: 138 dB
- Crossover Frequency: 32-85 Hz, 32-120 Hz, 32-150 Hz
- Nominal Impedance: 8 Ω
- Recommended Power: 1100 to 1750 Watts / 8 Ω
- Driver: 1 x 18-inch 8 Ω long excursion
- Connectors: 2 pairs (In/Out) of 7.62 mm pitch screw terminal blocks (+/poles)
- Compatible cables section: Cables from 1.5 mm² to 3.3 mm² (AWG 12 to 15) copper section
- Compatible cables outside diameter: Cable with maximum outside diameter of 11 mm
- Rigging points: 4 x pairs of M10 rigging points (two on each side)
- Material: 15mm baltic birch plywood body and Magnelis grill
- Front Finish: UV & Fire resistant acoustic fabric
- Operating temperature range: 0°C 40 °C (32° F 104° F)
- Storage temperature range: -20 °C 60 °C (-4 ° F 140° F)
- IP Rating: IP55
- Dimensions (W x H x D): 600 x 531 x 671 mm (23.6 x 20.9 x 26.4 inches)
- Weight: 41 kg (91 lbs)
System Operation:
- Recommended powering solution: NXAMP4x2mk2 Powered TDcontroller: 1 x eLS18 per channel
- Optional powering solution:
- DTD + DTDAMP4x0.7: 1 x eLS18 per bridged channels
- DTD + DTDAMP4x1.3: 1 x eLS18 per bridged channels
- NXAMP4x1mk2 Powered TDcontroller: up to 2 x eLS18 per bridged channels
- NXAMP4x4mk2 Powered TDcontroller: up to 4 x eLS18 per channel
