Overview
The Neumann TLM170 Stereo Matched Set doubles the quality and sound of the famed condenser microphone by including two factory matched microphones in this kit.
Features
- Achieve excellent stereo recordings of instruments, performances, ambiance and more. Two shock mounts and a storage case is also included.
- The TLM 170 RMT features a non-reflective black matt finish, making the microphone less conspicuous in live sound and broadcast applications.
- FET 100 technology along with a balanced, transformerless output stage result in high gain and low noise audio output.
- Omni-directional, wide angled cardioid, hyper-cardioid and figure eight are all available.
Specifications
| Transducer | (Pressure Gradient) Condenser |
| Polar Pattern | Cardioid, Omni-directional and Figure-8 |
| Frequency Response | 20 Hz - 20 kHz |
| Dynamic Range (Typical) | 115 dB (A-Weighted) |
| Signal-to-Noise Ratio | 82 dB (A-Weighted) Cardioid79 dB (A-Weighted) Omni-directional80 dB (A-Weighted) Figure-8 |
| Maximum Input Sound Level | 117 dB @ 1kHz, 0.5% THD (127 dB with Pad) |
| Power Requirements | Phantom 48v (+/-4v) |
| Output Impedance | 200 Ohms |
| Output Connectors | XLR-3M Type |
| Pad | Yes, -10 dB Preattenuation |
| Low Frequency Roll-Off | Yes, Switchable - To Reduce Proximity Effect |
| Dimensions | (152 x 60mm) LxD diameter |
| Weight | (625 g) |
