Meyer Sound USW-112P,US,STD,3PIN

Meyer Sound USW-112P,US,STD,3PIN

Meyer Sound USW-112P,US,STD,3PIN

Meyer Sound USW-112P,US,STD,3PIN

USW-112P,US,STD,3PIN

SKU: MSL-09.298.001.03
CALL FOR PRICE

Overview

The USW-112P compact narrow subwoofer provides big bass sound for very tight spaces. Its compact rectangular enclosure and slanted connector panel enable flush-mounting of the cabinet against wall surfaces, reducing required installation depth to 12 inches, including connectors.

Designed to be the ideal companion to Meyer Sound’s ULTRA-X20, it also complements the low frequencies in other Meyer Sound loudspeakers, such as the UP-4slim and those in the UPM family.

The USW-112P has an operating frequency range of 35–140 Hz with a linear peak SPL of 123 dB, measured in half-space at 4 m and referred to 1 m using M-noise. The bass reflex cabinet employs a low-velocity port design for high efficiency and low port distortion.

The cabinet houses an open-loop, Class-D power amplifier with signal processing including correction filters for phase and frequency response, and driver protection circuitry. The amplifier/ processing package incorporates Meyer Sound’s Intelligent AC™, which auto-selects the correct operating voltage, suppresses high voltage transients, filters EMI and provides soft-start power-up.

Audio connectors are XLR (analog version) or etherCON TOP (Milan™ Certified digital version1), and power input and looping output connectors are PowerCON 20 (analog version) or powerCON TRUE1 TOP (digital and weather-protected models).

Remote monitoring is possible on the analog version via the optional RMS remote monitoring module, which in conjunction with the optional RMServer™ hardware unit, provides comprehensive monitoring of loudspeaker parameters from a host computer running Compass® Control Software. The digital version provides integrated monitoring via Compass Control Software.

Meyer Sound builds the USW-112P cabinet from premium birch plywood coated with a slightly textured black finish and includes a powder-coated, round-perforated steel grille to protect the drivers.

With its versatile shape, the USW-112P can be placed on the ground in either horizontal or vertical positions to accommodate installation requirements.

The USW-112P comes standard with M8 mounting points at the top and bottom for use with the optional U-bracket that enables wall, ceiling, or truss mounting. It also features an integral 35 mm pole mount receptacle with M20 threads for added stability.

Weather protection and custom color finishes for specific cosmetic requirements are available options.

Specifications

ACOUSTICAL1

Operating Frequency Range2

35 Hz – 140 Hz

Frequency Response3

36 Hz – 125 Hz ± 4 dB

Phase Response

45 Hz – 120 Hz ±30°

Linear Peak SPL4

123 dB with > 10.5 dB crest factor (M-noise), 123 dB (Pink Noise), 125 dB (B-noise)

TRANSDUCER

Low Frequency

One 12-inch cone driver; 3 Ω nominal impedance

AUDIO INPUT

ANALOG AUDIO VERSION

DIGITAL AUDIO VERSION

Type

Differential, electronically balanced

Maximum Common Mode Range

±15 V DC, clamped to earth for voltage transient protection

Connectors

XLR 3-pin female input with male loop output; optional XLR 5-pin connector to accommodate both balanced audio and RMS signals;

XLR 3-pin TOP (Total Outdoor Protection) connectors on weather-protected units only.

etherCON TOP

Input Impedance

10 kΩ differential between Audio(+) and Audio(-)

Wiring5

Pin 1: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies

Pin 2: Audio + Pin 3: Audio –

Pin 4: RMS (polarity insensitive)

Pin 5: RMS (polarity insensitive) Case: Earth ground and chassis

Nominal Input Sensitivity

0 dBV (1.0 V rms) continuous is typically the onset of limiting for noise and music

Input Level

Audio source must be capable of producing of

+20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker.

Digital Format

Milan Certified

AMPLIFIER

Type

Open-loop, Class-D

Total Output Power6

1200 W peak

THD, IM, TIM

< 0.02%

Cooling

Convection

AC POWER

Connector

powerCON 20 input with loop output;

powerCON TRUE1 TOP with loop output on digital and weather-protected units

Automatic Voltage Selection

90–265 V AC, 50–60 Hz

Safety Rated Voltage Range

100–240 V AC, 50–60 Hz

Turn-on and Turn-off Points

90 V AC turn-on, no turn-off; internal fuse protection above 265 V AC

CURRENT DRAW

Idle Current

0.23 A rms (115 V AC); 0.18 A rms (230 V AC); 0.25 A rms (100 V AC)

Maximum Long-Term Continuous Current (>10 sec)

1.2 A rms (115 V AC); 0.7 A rms (230 V AC); 1.4 A rms (100 V AC)

Burst Current (<1 sec)7

3.6 A rms (115 V AC); 1.8 A rms (230 V AC); 4.1 A rms (100 V AC)

Maximum Instantaneous Peak Current

8.9 A peak (115 V AC); 4.5 A peak (230 V AC); 10.3 A peak (100 V AC)

Inrush Current

< 20 A peak

REMOTE MONITORING

ANALOG AUDIO VERSION9

DIGITAL AUDIO VERSION

 

Optional RMS module: two-conductor twisted-pair network that reports all operating parameters of amplifiers to system operator’s host computer via the RMServer hardware unit

Integrated monitoring via Compass Control Software

PHYSICAL

Dimensions

W: 13.5 in (343 mm) x H: 23.5 in (597 mm) x D: 12 in (305 mm)

Weight

45 lb (20 kg)

Enclosure

Premium multi-ply birch with slightly textured black finish

IP Rating

Weather-protected version rated IP54. See the USW-112P Operating Instructions for details

Protective Grille

Powder-coated, round-perforated steel

Rigging

Two integrated M8 threaded points; 35 mm Pole Mount with M20 thread; optional U-bracket for wall, ceiling, or truss mounting