Overview
The LINA™ compact linear line array loudspeaker excels in array performance while providing exceptional high frequency headroom, phase coherence, and consistent coverage. Its light weight and small size are ideal for venues that require a low-profile, high-power, curvilinear array system with exceptional fidelity, such as small theaters, theme parks, houses of worship, and AV systems.
Single cabinet or short stack implementations of LINA are also well-suited for front-fill and under-balcony applications that must attain precise high-frequency vertical coverage. In addition to standalone implementations, LINA is useful in LEOPARD™ systems as a supplemental fill loudspeaker.
LINA evolved from the highly successful MINA™ loudspeaker, now optimized using the state-of-the-art technology that made the LEO® family an award-winning product line. LINA delivers the same signature and advantages of self-powered design, linear response, and precise directional control. Like LEOPARD, LINA loudspeakers offer Native Mode, a configuration optimized to yield excellent system performance right out of the box with minimal external processing.
LINA features an innovative, newly designed, highly efficient class D amplifier that reproduces any sound source with linearity over a wide dynamic range, from speech and classical music to rock and EDM. LINA faithfully reproduces audio with tremendous power, superior intelligibility, and extremely low distortion.
Drive LINA systems with Meyer Sound’s Galileo® GALAXY Network Platform, which provides 24 bit, 96 kHz audio, matrix routing, alignment, and processing for array components. Using the Meyer Sound MDM-832 distribution module to route AC power, balanced audio, and optional RMS™ module signals to multiple LINA loudspeakers further enhances the portability and ease of configuring a system.
For low-frequency extension, LINA pairs with Meyer Sound’s 750-LFC low-frequency control element, which can be flown in a LINA array without transition hardware. Like LINA, the 750-LFC is efficient and versatile, with an excellent power-to-size ratio. Applications that require more low-frequency headroom can use Meyer Sound’s 900-LFC, which also integrates with LINA systems.
LINA includes Meyer Sound’s QuickFly® rigging with captive GuideALinks™ that can create splay angles from 1 to 11 degrees. A range of available rigging accessories make LINA a versatile solution for a variety of applications. To design entire LINA family systems, use Meyer Sound’s MAPP™ System Design Tool, as it effectively anticipates system SPL and coverage requirements. This useful tool also helps verify rigging load ratings.
Meyer Sound coats the premium multi-ply birch LINA cabinet with a slightly textured black finish. Other options include weather protection and custom color finishes for fixed installations and applications with specific cosmetic requirements.
Features and Benefits
- meyer-blue-rule-line.png
- Small footprint and narrow width are ideal for small venues and fill applications
- Amazing power-to-size ratio
- Exceptional linearity and transient reproduction at any level, high peak power output, and extremely low distortion
- Self-powered to simplify setup and increase reliability
- Flexible rigging for flown and ground-stacked arrays
- Easy integration with Meyer Sound’s LEOPARD line array loudspeaker, and the 750-LFC and 900-LFC low frequency control elements
Applications
- meyer-blue-rule-line.png
- Small theaters and houses of worship
- Touring productions, ballrooms, and corporate AV
- Theme parks
- Front-fill and under-balcony coverage
- Side-fill for LEOPARD systems
Specifications
|
ACOUSTICAL1 |
|
|
65 Hz – 18 kHz |
|
|
Phase Response |
100 Hz – 18 kHz ±45° |
|
Maximum SPL3 |
138 dB |
|
Linear Peak SPL4 |
132 dB with 19 dB crest factor (M-noise), 128 dB (Pink noise), 130 dB (B-noise) |
|
COVERAGE |
|
|
Horizontal Coverage |
100° |
|
Vertical Coverage |
Varies, depending on array length and configuration |
|
TRANSDUCERS |
|
|
Low Frequency |
Two 6.5-inch long-excursion cone drivers; 4 Ω nominal impedance |
|
High Frequency |
One 3-inch diaphragm compression driver coupled to a constant-directivity horn through a patented REM® manifold; 8 Ω nominal impedance |
|
AUDIO INPUT |
|
|
Type |
Differential, electronically balanced |
|
Maximum Common Mode Range |
±15 V DC, clamped to earth for voltage transient protection |
|
Connectors |
XLR 3-pin female input with male loop output. Optional XLR 5-pin connector to accommodate both balanced audio and RMS signals. |
|
Input Impedance |
10 kΩ differential between pins 2 and 3 |
|
Wiring5 |
Pin 1: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies Pin 2: Signal + Pin 3: Signal – Pin 4: RMS Pin 5: RMS Case: Earth ground and chassis |
|
Nominal Input Sensitivity |
0 dBV (1.0 V rms) continuous is typically the onset of limiting for noise and music |
|
Input Level |
Audio source must be capable of producing of +20 dBV (10 V rms) into 600 Ω to produce the maximum peak SPL over the operating bandwidth of the loudspeaker. |
|
AMPLIFIER |
|
|
Type |
3-channel, Class-D |
|
Total Output Power6 |
1950 W peak |
|
THD, IM, TIM |
< 0.02% |
|
Cooling |
Convection |
|
AC POWER |
|
|
Connector |
powerCON 20 input with loop output |
|
Automatic Voltage Selection |
90–265 V AC, 50–60 Hz |
|
Safety Rated Voltage Range |
100–240 V AC, 50–60 Hz |
|
Turn-on and Turn-off Points |
90 V AC turn-on, no turn-off; internal fuse-protection above 265 V AC |
|
CURRENT DRAW |
|
|
Idle Current |
0.25 A rms (115 V AC); 0.25 A rms (230 V AC); 0.29 A rms (100 V AC) |
|
Maximum Long-Term Continuous Current (>10 sec) |
2.3 A rms (115 V AC); 1.16 A rms (230 V AC); 2.8 A rms (100 V AC) |
|
Burst Current (<1 sec)7 |
3.9 A rms (115 V AC), 1.7 A rms (230 V AC), 4.5 A rms (100 V AC) |
|
Maximum Instantaneous Peak Current |
8.8 A peak (115 V AC), 4.0 A peak (230 V AC), 9.2 A peak (100 V AC) |
|
Inrush Current |
< 20.0 A peak |
|
RMS NETWORK (OPTIONAL) |
|
|
Equipped with two-conductor twisted-pair network, reporting all operating parameters of amplifiers to system operator’s host computer. |
|
|
PHYSICAL |
|
|
Dimensions |
W: 20.27 in (515 mm) x H: 8.38 in (213 mm) x D: 15.32 in (389 mm) |
|
Weight |
43 lb (19.5 kg) |
|
Enclosure |
Premium multi-ply birch, slightly textured black finish |
|
Protective Grille |
Powder-coated, hex-stamped steel with acoustical black mesh |
|
Rigging |
End frames with captive GuideALinks secured with 0.25 in x 0.53 in quick release pins that allow 0° to 11° splay angles. M6 attachment points for optional MYA-MINA/LINA mounting yoke and MUB- MINA/LINA U-bracket |
