Meyer Sound’s ULTRA-X20XP loudspeaker extends the award-winning, state-of-the-art ULTRA-X40 point source technology to a smaller version for size- and weight-critical applications. Enhancements extending to the smaller ULTRA-X20XP/22XP/23XP versions include:

• An innovative, highly efficient class-D amplifier that reproduces any sound source with linearity over a wide dynamic range.
  
• A weight of only 27 lb (12.3 kg) and a reduced cabinet size.
• A concentric driver configuration that has all the benefits of a coaxial driver, yet none of the disadvantages. This configuration also supports directional control of frequencies down to 600 Hz.
  
• A rotatable, extremely well-behaved horn designed for very precise, even coverage. This horn design, in conjunction with the concentric driver configuration, delivers the same pattern regardless of orientation.

The ULTRA-X20XP loudspeaker provides high power output, low distortion, and consistent polar response in a very compact, vented enclosure. The loudspeaker features two 5-inch cone low-frequency drivers and one 2-inch diaphragm compression driver coupled with
a rotatable 110° x 50° Constant-Q horn. A more controlled pattern is available on the ULTRA-X22XP model, which is fitted with a rotatable 80° x 50° Constant-Q horn. A wider coverage version, the ULTRA-X23XP, offers a 110° x 110° Constant-Q horn.

Because of its proprietary, high-frequency horn, the beamwidth remains consistent within close tolerances in both the horizontal and vertical planes, and across the horn’s operating frequency range. Uniformly predictable polar behavior takes much of the guesswork out of system design and assures optimal system performance. A three-channel, class-D digital power amplifier powers the ULTRA-X20XP loudspeaker, which has a total peak power output of 860 watts. Audio processing includes electronic crossover, correction filters for phase and frequency response, and driver protection circuitry. Phase-corrected electronics ensure flat acoustical amplitude and phase response, resulting in exceptional impulse response and precise imaging.

With IntelligentDC technology, the ULTRA-X20XP receives DC power and balanced audio from a single Phoenix™ 5-pin connector. Powering the loudspeakers from a Meyer Sound MPS IntelligentDC external power supply eliminates the need for wiring conduits while still preserving the
advantages of self-powered systems.

The Meyer Sound MPS IntelligentDC power supplies distribute DC power and balanced audio to ULTRA-X20XP loudspeakers or other Meyer Sound IntelligentDC loudspeakers. The ULTRA-X20XP’s amplifier and signal-processing circuits store DC power and tolerate voltage drops, thereby accommodating light-gauge cables and lengthy cable runs. Composite multi-conductor cables, such as Belden® 1502 or equivalent, can deliver both DC power and balanced audio to loudspeakers at cable lengths up to 150 feet with just 1 dB of loss in peak SPL using 18 AWG wire for power. Longer cable lengths are possible with heavier gauge wires. The two-channel MPS-482HP power supply is ideal for applications requiring a small channel count or the capability for mounting the supply remotely on a wall or ceiling, while the 8-channel MPS-488HP is suitable for larger installations. The MPS-488HP can be optionally purchased with an RMS module for connecting to Meyer Sound’s remote monitoring system.

Meyer Sound builds the elegant, slightly curved enclosure out of aluminum with a slightly textured black finish. A powder-coated, round-perforated steel grille provides protection to the front of the loudspeaker. The ULTRA-X20XP includes two integral M8 rigging points on each end to enable a variety of configurations including those requiring pole mounting, hanging individually from a single point, wall mounting or ceiling mounting. The ULTRA-X20XP also includes four M6 threaded holes with a 5-inch by 2.75-inch (127 mm by 70 mm) hole pattern on the rear for use with third-party wall mounts. Optional rigging accessories include a 35 mm to M8 pole adapter, a U-bracket, a yoke, and a pinnable link on a channel that allows the hanging of one or two units from a single pick-up point. Other options include weather protection and custom color finishes.

FEATURES

• A compact, elegant and light aluminum enclosure encases exceptional fidelity and surprising power capability
  
• Extraordinarily flat amplitude and phase response ensures tonal accuracy and precise imaging
• Wide pattern covers broad listening areas
• Rotatable horn provides installation flexibility
• Integral stand mount and QuickFly ® mounting options facilitate rigging