Meyer Sound USW-210P,US,STD

Meyer Sound USW-210P,US,STD

Meyer Sound USW-210P,US,STD

Meyer Sound USW-210P,US,STD

USW-210P,US,STD,M8,MILAN

SKU: MSL-09.277.201.01
CALL FOR PRICE

Overview

The USW-210P compact narrow subwoofer provides robust, extended low frequency response for installed sound applications that require convincing bass impact from a slender, low profile loudspeaker. Its dual-driver configuration permits a narrow form factor that fits into restricted architectural spaces to produce output levels equal to or exceeding systems with single 12-inch (or larger) drivers. Its slanted connector panel enables flush mounting the cabinet against wall surfaces, reducing the required installation depth to 12 inches, including connectors.

The USW-210P is ideal for installations requiring high performance and versatility along with an appealing, discreet aesthetic appearance. The USW-210P integrates easily with Meyer Sound loudspeaker systems, such as CAL™ and ULTRA Series loudspeakers.

The USW-210P has an operating frequency range of 30–140 Hz with a conservatively rated linear peak SPL of 126 dB with crest factor >11.5 dB, measured in half-space at 4 m and referred to 1 m using M-noise3. The long skinny bass reflex cabinet employs the same port design as Meyer Sound’s flagship 1100-LFC low frequency control element for high efficiency and low port distortion.

The cabinet houses a two-channel Class D power amplifier with signal processing including driver protection, and frequency and phase correction.

The Intelligent AC™ power supply provides automatic voltage selection, EMI filtering, soft current turn-on, and surge suppression.

The optional RMS™ remote monitoring system module provides comprehensive, real-time information about loudspeaker parameters from a Mac® or Windows®-based computer running Compass® control software via the RMServer interface.

Meyer Sound constructs the USW-210P cabinet from premium birch plywood coated with a durable black-textured finish and includes a stamped-steel grille to protect the drivers. Weather protection and custom color finishes for specific cosmetic requirements are available options.

With its versatile shape, the USW-210P can be placed on the ground in a horizontal or vertical position to accommodate installation requirements.

The USW-210P comes standard with M8 mounting points at the top and bottom for use with the optional U-bracket that enables wall or ceiling mounting.

In addition, the USW-210P can be securely mounted in a vertical orientation (connectors at top or bottom) using an optional aluminum base plate.

Features and Benefits

  • High power-to-size ratio
  • Discrete appearance and versatile, as it accommodates either vertical or horizontal placement
  • Fits into tight architectural spaces at only 12 inches deep including connectors
  • Clean and low distortion output due to its low air velocity port

Applications

  • Commercial installation
  • Theatrical sound reinforcement
  • Houses of worship
  • Conference rooms
  • High-end home theatre
  • AV systems
Specifications

ACOUSTICAL

Operating Frequency Range1

30–140 Hz

Frequency Response2

32–123 Hz ±4 dB

Phase Response

40–123 Hz ±30°

Linear Peak SPL3

126 dB with crest factor >11.5 dB (M-noise), 126 dB (Pink noise), 127 dB (B-noise)

Coverage

360° (single unit), varies with number of units and configuration

TRANSDUCERS

Low Frequency

Two 10-inch cone drivers, nominal impedance 4 Ω

AUDIO INPUT

Type

Differential, electronically balanced

Maximum Common Mode Range

±15 V DC, clamped to earth for voltage transient protection

Connectors

XLR 3-pin female input with male loop output

Input Impedance

10 kΩ differential between pins 2 and 3

Wiring

Pin 1: Chassis/earth through 1 kΩ, 1000 pF, 15 V clamp network to provide virtual ground lift at audio frequencies

Pin 2: Signal + Pin 3: Signal -

Case: Earth ground and chassis

Nominal Input Sensitivity

0 dBV (1 V rms) continuous is typically the onset of limiting for noise and music

Input Level

Audio source must be capable of producing a minimum of +20 dBV (10 V rms) into 600 Ω to produce maximum peak SPL over the operating bandwidth of the speaker

AMPLIFIERS

Type

2-channel (class D) with crossover

Total Output Power4

1800 W peak

THD, IM, TIM

< 0.02%

Load

4 Ω per channel

Cooling

Convection

AC POWER

Connector

powerCON 20 input with loop output

Automatic Voltage Selection

Automatic

Safety Agency Rated Operating Range

100–240 V AC, 50–60 Hz

Turn-on and Turn-off Points

90 V AC turn-on, no turn-off; internal fuse-protection above 265 V AC

CURRENT DRAW

Idle Current

0.27 A rms (115 V AC); 0.25 A rms (230 V AC); 0.29 A rms (100 V AC)

Max Long-Term Continuous Current (>10 sec)

1.4 A rms (115 V AC); 0.7 A rms (230 V AC); 1.6 A rms (100 V AC)

Burst Current (<1 sec)5

4.5 A rms (115 A AC); 2.1 A rms (230 V AC); 4.8 A rms (100 V AC)

Maximum Instantaneous Peak Current

9.7 A peak (115 V AC); 4.6 A peak (230 V AC); 10.8 A peak (100 V AC)

Inrush Current

<20 A peak

PHYSICAL

Dimensions

W: 12.00 in (304.8 mm) x H: 41.33 in (1049.8 mm) x D: 12.00 in (304.8 mm)

Weight

56 lb (25.40 kg)

Enclosure

Premium birch plywood, slightly textured black finish; powder-coated, stamped-steel, protective grille

Rigging

Top and bottom mounting points with M8 threads

RMS NETWORK (OPTIONAL)

Type

Two-conductor, twisted-pair network that reports all amplifier operating parameters to host computers