LIGHT SOURCE
- 6,000 lumens RGBW light output
- High narrow intensity: 360,000 cd
- Pixelated Beam: 7x 60W RGBW LEDs
- Filament Aura: 12x 4W RGBW LEDs
- Fully calibrated using Martin's Full Gamut Color Calibration
- Flicker-Free operation – LED driver frequency suitable for all kinds of camera applications
- LED Driver frequency adjustable for demanding applications
OPTICS
- Tight beam and beautiful wash field
- 6.3 – 50.4˚ zoom – Precise, silent and fast zoom
- Even soft edge wash field with zero hotspot
- High intensity mid-air beams
- Minimal stray light
- Minor color temperature shift from center to edge
SOFTLENS ACCESSORY INCLUDED
- Creates an even softer edge wash field
- Minimal impact to Aura filament effects
- Attaches to front of fixture
- Can remain attached to fixture inside flightcase SiP
COLOR PALETTE
- RGBW color mixing with very bright and vibrant saturated colors, as well as soft pastels and white tones
- Calibrated and Extended Color Modes
- Calibrated CTC control: 1,000 – 12,850 K
- Green Magenta Shift (Tint) Control
- Tungsten Emulation Option
- Virtual Color Wheel
DYNAMIC EFFECTS
- More than 200 built-in FX macros with control of foreground color, background color, speed and direction
- P3 video mapping of fixture Beam pixels and/or Aura filaments
- P3 Mix allowing crossfade between video looks and DMX looks
- High-speed pan, tilt and zoom
COOLING AND NOISE
- Ultra-quiet cooling system
- Theater / Broadcast mode at just 25.2 dB(A)
- Low noise pan/tilt and effects operation
CONSTRUCTION
- Smart outdoor rating for any weather condition
- Weight 8.95 kg (19.73 lbs.)
- Dimensions: 338 x 380 x 226 mm
CONTROL
- Battery-powered control panel on the base
- DMX in & thru
- Ethernet in & thru, supporting Art-Net, sACN & Martin P3
- Fail-safe bypass on Ethernet ports
- RDM over DMX and RDM over Art-Net
Specifications
PHYSICAL
- Width (across yoke): 338 mm (13.31 in.)
- Width (base): 306 mm (12.05 in.)
- Height (head straight up): 380 mm (14.96 in.)
- Height (maximum): 421 mm (16.57 in.)
- Depth (head): 205 mm (8.07 in.)
- Depth (base): 226 mm (8.90 in.)
- Minimum center-to-center distance in side-by-side installation: 350 mm (13.78 in.)
- Weight: 8.95 kg (19.73 lbs)
DYNAMIC EFFECTS
- Beam Dimmer/Shutter: 0 - 100% continuous dimming, regular and random strobe, instant open and blackout
- Beam Dimming options: Choice of four dimming curves
- Beam Color Mixing: RGB, independently variable 0 - 100%
- Beam Color Temperature Control: Variable 1,000 - 12,850 K
- Beam Tint Control: Variable green-magenta shift
- Beam Virtual Color wheel: 48 color presets, continuous rotation & random color
- Zoom: Motorized with 1:6 zoom ratio
- Pan: Motorized 540°
- Tilt: Motorized 220°
- Beam PixelMapping: individual RGB control of each of the 7 Beam pixels
- Beam P3 Mix: Videomapping of fixture with variable crossfade between DMX control and video control
- Aura Dimmer/Shutter: 0 - 100% continuous dimming, regular and random strobe effects, instant open and blackout
- Aura Dimming options: Choice of four dimming curves
- Aura Color Mixing: RGB, independently variable 0 - 100%
- Aura Color Temperature Control: Variable 1,000 - 12,850 K
- Aura Tint Control: Variable green-magenta shift
- Aura Virtual Color wheel: 48 color presets, continuous rotation & random color
- Aura PixelMapping: individual RGB control of each of the 12 Aura filaments
- Aura P3 Mix: Videomapping of fixture with variable crossfade between DMX control and video control
- Pre-programmed effects: Two ranges of FX on Beam, Aura or Combination; independent or synchronized/combined
- LED Frequency control: Variable LED PWM control
CONTROL AND PROGRAMMING
- Control Protocols: DMX, RDM, Art-Net, RDM over Art-Net, sACN and P3
- Protocol Detection: Automatic
- DMX Modes: Compact, Basic, Extended & Ludicrous
- DMX Channels: 20, 36, 57 & 93
- 16-bit Controllable Parameters: Beam & Aura Dimming, Beam Color Mixing, Zoom, Pan and Tilt
- Setting and Addressing: Display Menu, RDM, RDM over Art-Net or P3
- Local User Interface: Backlit LCD Display with battery-powered operation
- Fixture identification: User-settable ID number
- DMX Compliance: USITT DMX512-A
- RDM Compliance: ANSI/ESTA E1.20
- Art-Net Compliance: Art-Net 1, 2, 3 and 4; including RDM over Art-Net
- sACN Compliance: ANSI E1.31 - 2016
- Martin P3 Compliance: P3 System Controller Software 5.1.0 or newer
- DMX/RDM Transceiver: Galvanic-isolated RS-485
- Ethernet Transceiver: 10/100Mbit (with fail-safe bypass)
- Firmware Update: via USB type C memory device, via DMX using Martin Companion or via Ethernet using P3 System Controller
OPTICS
- Front Lens Diameter: 196 mm (7.72 in.)
- Zoom Range: 1:6
- Full Zoom Range at Half Peak (Beam Angle): 6.3° - 35.3°
- Full Zoom Range at Tenth Peak (Field Angle): 8.8° - 50.4°
- Beam Light Source: 7 x 60 W RGBW LED
- Aura Light Source: 12 x 4 W RGBW LED
- Max. Total Beam LED Engine Power: 296.5 W
- Max. Total Aura LED Engine Power: 35.1 W
- Minimum LED lifetime: > 50.000 hours (to > 70% luminous output)*
- *Figure obtained under manufacturer's test conditions
PHOTOMETRIC DATA
- Light Engine Luminous Output: 11,000 lumens
- Fixture Luminous Output Wide: 6,000 lumens
- Fixture Luminous Output Narrow: 4,500 lumens
- Peak Luminous Intensity Narrow: 360,000 cd
- CCT: Variable 1,000 K - 12,850 K (+/- 200 K)
- CRI (Color Rendering Index) high output mode: ≥ 71
- CRI (Color Rendering Index) high quality mode: ≥ TBC
- CQS (Color Quality Scale) high output mode: ≥ 80
- CQS (Color Quality Scale) high quality mode: ≥ TBC
- TM-30 Rf (IES TM-30-15 Fidelity Index) high output mode: ≥ 78
- TM-30 Rf (IES TM-30-15 Fidelity Index) high quality mode: ≥ TBC
- TM-30 Rg (IES TM-30-15 Gamut Index) high output mode: ≥ 117
- TM-30 Rg (IES TM-30-15 Gamut Index) high quality mode: ≥ TBC
- TLCI (Television Lighting Consistency Index) high output mode: ≥ 57
- TLCI (Television Lighting Consistency Index) high quality mode: ≥ TBC
- Beam LED Refresh Rate: variable 2,400 Hz - 3,000 Hz and 24,000 Hz mode
- Aura LED Refresh Rate: 1,200 Hz
- Binning: Tight color and flux binning
- Calibration: Full Gamut Color Calibration of Beam and Aura
- Color Modes: Extended Color Mode and Calibrated Color Mode
CONSTRUCTION
- Housing: High-impact flame-retardant thermoplastic
- Color: Black
- Protection rating: IP44
INSTALLATION
- Mounting points: 2 pairs of 1/4-turn points for 106 mm (4.17 in.) center-to-center omega brackets and single M12 threaded hole for rigging clamp
- Location: Indoor or Temporary Outdoor use
- Orientation: Any, except with display facing upwards in outdoor application
- Minimum distance to combustible materials: 0.2 m (7.87 in.)
- Minimum distance to illuminated surfaces: 1.0 m (39.37 in.)
CONNECTIONS
- Firmware from flash memory: USB 2.0 type C port
- AC mains power in/thru: Neutrik powerCON TRUE1 TOP
- DMX and RDM data in/thru: Neutrik 5-pin locking XLR TOP
- Ethernet (Art-Net, sACN and P3) in/thru, including fail-safe bypass: Neutrik etherCON TOP
ELECTRICAL
- AC power: 100-240 V AC nominal, 50/60 Hz
- Power supply unit: Auto-ranging electronic switch mode
- Maximum total power consumption: 340 W
- Maximum total current at 100-120V: 3.9 A
- Maximum total current at 200-240V: 1.8 A
- Typical half-cycle RMS inrush current at 230 V, 50 Hz: 7.0 A
- Typical earth-leakage current: 0.431 mA
- Power consumption, all effects static, zero light output: 48 W
THERMAL
- Cooling: Forced air (temperature regulated, low noise, user-definable levels)
- Maximum ambient temperature (Ta max.): 40° C (104° F)
- Minimum ambient temperature (Ta min.): 5° C (41° F)
- Maximum surface temperature, steady state, at 40° C ambient: 60° C (140° F)
- Total heat dissipation (calculated, +/- 10%): 972 BTU/hr.
ACOUSTIC DATA
- Sound Pressure Level (LpA) @ 1 m (default regulated fan mode, full output): 34.4 dB(A)
- Sound Pressure Level (LpA) @ 1 m (constant fan mode ultra low): 25.2 dB(A)
ENVIRONMENTAL
- RoHS: Compliant
- REACH: Compliant
- WEEE: Compliant
- Proposition 65: Compliant
- Eficacy (max output): 21.3 lm/W
- LWR*: 670 lm/kg (304 lm/lb)
- LWR = Lumen-to-Weight Ratio
APPROVALS
- Global CB Certification/IECEE: IEC 60598-2-17 (IEC 60598-1)
- EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
- EU EMC: EN 55015; EN 55032; EN 55035; EN 61547; EN 61000-3-3
- US safety: UL 1573
- US EMC: FCC Part 15 Class B
- Canadian safety: CSA C22.2 No. 166
- Canadian EMC: ICES-003 Class B, ICES-005 Class B
- Australia/NZ: RCM
- United Kingdom: UKCA