Overview

The Exterior™ Projection 1000 is an unparalleled, powerful tool for permanent outdoor installations to integrate textures, patterns and graphics for limitless creative exterior lighting designs.

Sporting high impact and low maintenance, this advanced, IP66-rated LED projector offers sharp image quality, dynamic features and great reach over huge distances.

Creating custom gobos for building facades

• Flat-field, high-contrast image projection with wide zoom range
• Fully weatherized with low maintenance and running
• Full CMY color mixing for maximum creativity

Features

• Flat field, high contrast image projection based on high power LED engine
• 0-100% electronic dimming
• Full CMY color mixing + additional color wheel with 7 interchangeable colors
• 7 gobo slots for projecting graphic images (gobos included)
• Animation system for creating animated lighting effects (horizontal and vertical)
• Zoom range from 10° - 44° for exact projection on desired surface
• Variable frost for creating morphing effects and hybrid function as wash light
• 2 rotating prisms for creating abstract multi patterns
• Intuitive setup, configuration and stand-alone programming via graphical OLED display
• RDM and DMX control
• Fully weatherized IP66 fixture for permanent outdoor installation
• Fully convection cooling using heat pipes technology

Specifications

Physical

• Length: 702 mm (27.7 in.)
• Width: 417 mm (16.5 in.)
• Height: 618 mm (24.4 in.)
• Weight: 50 kg (110 lbs.)
• All figures include mounting yoke

Dynamic Effects

• Color mixing: CMY, independently variable 0 - 100%
• Color wheel: 7 interchangeable colors + open
• Gobo wheel: 7 rotating gobos plus open, indexing, variable rotation
• Gobo animation wheel: Indexing, continuous rotation with variable angle, speed and direction
• Prism: Prism wheel with 2 interchangeable prisms, prism rotation and indexing
• Frost filter: Motorized, variable
• Zoom: 10° - 44° (cut-off angles)
• Focus: Motorized, variable 3 m (9.8 ft.) to infinity
• Dimming: Electronic, constantly variable 0-100%, 16-bit control
• Shutter: Electronic, strobe and pulse effects, instant open and blackout

Control and Programming

• Control options: DMX, RDM, standalone
• Configuration, addressing and status: Onboard control panel with OLED display or via RDM
• 8-bit control: CMY, color selection, gobo selection, prism, frost, animation
• 16-bit control: Gobo indexing and rotation, zoom, focus and intensity
• DMX channels: 20
• DMX compliance: USITT DMX512-A
• RDM compliance: ANSI/ESTA E1.20

Optics

• Light source: 440 W white light LED engine
• CRI (Color Rendering Index): 72
• Color temperature: 6500 K (±250 K)
• LED lifetime: 20,000 hours (to >70% luminous output)*
• LED manufacturer: Appotronics
• *Figure obtained under manufacturer's test conditions

Photometric Data

• Cut-off angle: 10° - 44°
• Luminous intensity:

  At 10° zoom: 11,500 lumens
  At 16° zoom: 15,000 lumens
  At 40° zoom: 16,800 lumens

• Center Peak:

  At 10° zoom: 731,000 cd
  At 16° zoom: 311,000 cd
  At 40° zoom: 42,000 cd

Construction

• Housing: Cast aluminum
• Finish: Hard anodized, white or metallic grey lacquered
• Front glass: 5 mm (0.2 in.) anti-reflection coated tempered glass
• Ingress protection: IP66
• Impact resistance: IK08 (with control panel display cover plate installed)
• Corrosion resistance: C5-M (very high corrosivity / marine, ISO 12944)
• EPA (Effective Projected Area): 0.28m²

Gobos

• Suitable material: Metal or borosilicate glass, coatings heat-resistant to 450°C (842° F)
• Gobo diameter: 30.0 mm +0/-0.3 mm (1.2 in. +0/-0.02 in.)
• Maximum image diameter: 26 mm (1.02 in.)
• Gobo thickness, minimum: 1.1 mm ±0.1 mm (0.045 ±0.004 in.)
• Gobo thickness, maximum: 3.0 mm ±0.3 mm (0.118 in. ± 0.012 in.)*
• *Gobos thicker than 2.5 mm require a shorter spring in the goboholder

Installation

• Mounting: Adjustable yoke
• Location: Suitable for wet locations. Do not immerse in water.
• Orientation: Any (sides must be kept vertical)
• Minimum distance to illuminated surfaces: 0.5 m (20 in.)

Connections

• Power cable entry: IP66 cable gland
• Power connection: 1.8 m (5.9 ft.) cable tail with bare ends
• Power cable type: EU models: H07RN-F 450/700V, Ø10 mm
• US models: SJTW 14AWG, 300V, Ø9.3 mm
• Data cable entry: IP66 cable gland
• Data connection: 1.8 m (5.9 ft.) combined input + output cable tail with bare ends

Electrical

• AC power: 100-120/200-277 V nominal, 50/60 Hz
• Power Supply: Auto-ranging electronic switch-mode
• Typical half-cycle RMS inrush current: 15.5 A
• Surge protection: 4 KV
• Idle power (zero intensity, no effects applied): 75 W

Typical Power and Current

• 120 V, 60 Hz: 645 W, 5.5 A, PF 0.98
• 230 V, 50 Hz: 635 W, 2.9 A, PF 0.95
• 277 V, 60 Hz: 635 W, 2.6 A, PF 0.90
• Figures are typical, not maximum. Measurements made at nominal voltage with all LEDs at full intensity. Allow for a deviation of +/- 10%.

Thermal

• Cooling: Convection, internal forced air
• Total heat dissipation (calculated): 2350 BTU/hr.
• Maximum surface temperature: 85° C (185 ° F)
• Maximum ambient temperature (Ta max.): 45° C (113° F)*
• Minimum ambient temperature (Ta min.): -30° C (-22° F)**

• *Above this temperature, the fixture regulates output to protect from overheating.
  **For instant wake-up with no warm-up mode, leave power applied constantly in ambient temperatures below 0° C (32° F).
  

Approvals

• EU safety: EN 60598-2-1, EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
• EU EMC: EN 55015, EN 55032, EN 55103-2, EN 61000-3-2, EN 61000-3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61547
• US safety: ANSI/UL 1598
• US EMC: CFR 47 Part 15 Class A
• Canadian safety: CSA C22.2 No 250.0
• Australia/NZ: RCM

Included Items

• Silica gel desiccant bag: P/N 37220000
• Two gobo retaining springs

Accessories

• Glare Shield, Exterior Projection 1000: P/N 91611768
• Projection Setup Gobo, Exterior Projection 1000: P/N 91616075

Related Items

• Martin™ RDM 5.5 Splitter: P/N 90758150

Spare Parts

• Silica gel desiccant bag in sealed foil pack: P/N 37220000
• Goboholder for EP1000 with magnet incl. washer & short spring: P/N 50482185
• Goboholder for EP1000 with magnet incl. washer & long spring: P/N 50482186

Ordering Information

• EU models:

  Exterior Projection 1000, EU, Aluminum: P/N 90512000
  Exterior Projection 1000, EU, White: P/N 90512015

• US Models:

  Exterior Projection 1000, US, Aluminum: P/N 90512005
  Exterior Projection 1000, US, White: P/N 90512010