Overview

Martin Exterior Linear Pro Graze QUAD lights are flexible, compact, LED-based architectural fixtures featuring high output with color boost technology and discreet yet robust housings. Delivering uniform light distribution of 15 degrees, they are perfect for highlighting textured surfaces, walls, facades, ceilings and other surfaces in stadiums and arenas, cruise ships, theme parks, hotels, casinos, bridges, tunnels or other permanent indoor or outdoor installations.

Graze QUAD models feature homogenized color mixing with 8 LEDs/ft and an integrated color boosting feature for full-powered illumination of a single color or mixed colors. Each unit is factory calibrated for superior color consistency, making them up to three times brighter than comparable fixtures, yet boasting lower total power consumption. Logic RGB control of the RGBW engine is also included where white is automatically calculated. Optional micro lens film can be added for a wide range of additional beam configurations.

Packed with intelligent features, these fixtures offer a dedicated color temperature control channel, which accurately follows the black body curve, empowering lighting designers to set their favorite default color temperature. Integrated segment control allows the fixtures to be controlled down to 6-inch (15 cm) segments, creating more organic and subtle color transitions.

With a high focus on sustainability, these lights can be daisy-chained using a combined power and data connector, enabling long fixture runs for simpler infrastructures. Simple beam angle changeability makes late design changes and on-site adjustments easy and a smart mounting plate design offers a variety of standard or custom bracket solutions.

The slim design of these lights makes them easier to integrate into architectural elements with less structural requirements. All models are available in either 1ft or 4ft linear lengths and are shipped in FSC certified packaging.

Features

PHYSICAL

• Width: 40 mm (1.57 inch.)
• Height: 68 mm (2.67 inch)
• Length - 1 ft Version: 312mm (1.02 ft)
• Weight - 1 ft Version: 0.85 kg (1.9 lbs)

DYNAMIC EFFECTS

• Color mixing: RGB (white is calculated automatically)
• Intensity: 0 - 100%
• Segment Control: 0.5 ft, 1 ft or full 4 ft fixture control
  

CONTROL AND PROGRAMMING

• Control systems: DMX, RDM
• Control resolution: 8-bit DMX individual color control
• User interface: Magnetic button to call up fixture status and test fixture
  
• Stand-alone control: Up to 20 scenes with individual fade/hold times
• DMX compliance: USITT DMX512/1990
• RDM compliance: ANSI/ESTA E1.20
• Dimmer Resolution: 16-bit DMX control of intensity
• DMX channels 4ft: 6/4/3/12/24 (standard/RAW/1 seg/4 seg/8 seg)
• DMX channels 1ft: 6/4/3/6 (standard/RAW/1 seg/2 seg)

OPTICS

• Light source: QUAD color LED (8 LEDs per foot)
• Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
• Binning: Tight color and flux binning
  
• Calibration: Full Gamut Color Calibration (1 step MacAdam ellipse)
• Beam angle**: 15° , 15° x 30°, 15° X 60°
• *Figure obtained under manufacturer's test conditions
• ** Asymmetric beam angles for available as accessory micro-lens films

PHOTOMETRIC DATA

• CRI (Color Rendering Index) : >70
• CCT: 2000K - 12000K (default 4000K)

CONSTRUCTION

• Housing: Aluminum
• Finish: Clear anodized (standard) or optional colors on request
• Front: Clear polycarbonate
• Protection rating: IP66
• IK rating: IK08
• Effective Projected Area (EPA): 0.04 m2 per ft
• Corrosion resistance: C5 High (ISO 12944-6)
• Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6), 0.7g RMS Random (IEC 60068-2-64), 3.0g (ANSI C136-31)

INSTALLATION

• Orientation: Any
• Minimum distance to illuminated surfaces: 0.1 m / 0.3 ft.

ELECTRICAL

• AC power: 100-277 V nominal, 50/60 Hz
• Typical half-cycle RMS inrush current: 0.35 A
• Power supply unit: Auto-ranging electronic switch-mode
• Surge protection: 4KV
• Power/data in/thru: 8-pin custom connectors
• Idle power consumption: 1 ft length :1.54 W, 4 ft length: 2.30W (steady state, all LEDs at zero intensity)
• Max earth leakage: 1 ft length: 0.15 mA, 4 ft length: 0.21 mA
• Maximum connected 4ft fixtures*: 42 pcs (52 m /169 ft) @ 230V-277V
  
• Maximum total string length (cable + fixtures)*: 150 m / 328 ft
  
• * Refer to system diagram for details on fixture run limitations
  

THERMAL

• Cooling: Convection
• Total heat dissipation (calculated, +/- 10%): 41 BTU/hr. per foot
• Maximum ambient temperature: 45° C (113° F)*
• Minimum ambient temperature: -30° C (-22° F)
• *Above this temperature, the fixture regulates output to protect from overheating
  

ENVIRONMENTAL

• RoHS: Compliant
• REACH: Compliant
• WEEE: Compliant
• Proposition 65: Compliant
• FSC: Certified cardboard inlay and outer packaging

APPROVALS

• Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1)
• EU safety: EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
• EU EMC: EN 55015, EN 55032, EN55035, EN 61547, EN 61000-3-2, EN 61000-3-3
• US safety: ANSI/UL 1598
• US EMC: 47 CFR Part 15 Class B
• Canadian safety: CSA C22.2 No. 250.0
• Australia/NZ: RCM
• India: BIS IS 10322(Part5/section5)