Martin Pro 90570001

Martin Pro 90570001

Martin Pro 90570001

Martin Pro 90570001

Exterior Linear Pro-Cove, QUAD, 1ft

SKU: MAR-90570001
MSRP: $520.00
MAP: $520.00

Overview


Martin Exterior Linear Pro Cove QUAD lights are flexible, compact, LED-based architectural fixtures featuring high output with color boost technology and discreet yet robust housings. They offer uniform light distribution with a 100 degree beam angle that’s perfect for striking indirect lighting of ceilings, walls and other surfaces in stadiums and arenas, cruise ships, theme parks, hotels, casinos, bridges, tunnels, or other permanent indoor or outdoor installations.

These lights feature homogenized color mixing with 8 LEDs/ft and an integrated color boosting feature for full powered illumination of a single color or mixed colors. Each unit is factory calibrated for superior color consistency, making them up to three times brighter than comparable fixtures, yet boasting lower total power consumption. Logic RGB control of the RGBW engine is also included where white is automatically calculated.

Packed with intelligent features, Cove QUAD models offer a dedicated color temperature control channel, which accurately follows the black body curve, empowering lighting designers to set their favorite default color temperature. Integrated segment control allows the fixtures to be controlled down to 6-inch (15 cm) segments, creating more organic and subtle color transitions.

With a high focus on sustainability, Cove QUAD models can be daisy-chained using a combined power and data connector, enabling long fixture runs for simpler infrastructures. Simple beam angle changeability makes late design changes and on-site adjustments easy, and a smart mounting plate design offers a variety of standard or custom bracket solutions.

The slim design of these lights makes them easier to integrate into architectural elements with less structural requirements. All models are available in either 1ft or 4ft linear lengths and are shipped in FSC certified packaging.


Features



  • Color-calibrated QUAD color LEDs (8 LEDs/ft)
  • Homogenous color mixing
  • 100° beam angle for indirect lighting applications
  • Dedicated color temperature control channel (1800K - 12000K)
  • Selectable segment modes (1, 4 or 8 segments)
  • Selectable power consumption (12W/10W/5W) per foot
  • 5W/ft power mode meets ASHRAE standards for linear facade lighting 
  • Integrated multi-range power supply unit (PSU) 100-277V for long fixture runs
  • Hybrid power and data connector for easy daisy-chained configurations
  • DMX and RDM control
  • Integrated magnetic switch for local diagnostics
  • Rugged IP66 housing designed for permanent outdoor installations
  • Low weight 0.8 kg/ft (1.9 lbs/ft)
  • Compact design - 40mm (1.57 inch) width


Specifications

Physical

  • Width: 40 mm (1.57 inch.)
  • Height: 68 mm (2.67 inch)
  • Length - 1 ft Version: 312mm (1.02 ft)
  • Weight - 1 ft Version: 0.85 kg (1.9 lbs)

Dynamic Effects

  • Color mixing: RGBW
  • Color temperature control: 1800K – 12000K in 50K steps (default 4000K)
  • Intensity: 0 - 100%
  • Segment Control: 0.5ft, 1 ft or full 4 ft fixture control

Control and Programming

  • Control systems: DMX, RDM
  • Control resolution: 8-bit DMX individual color control
  • User interface: Magnetic button to call up fixture status and test fixture
  • Stand-alone control: Up to 20 scenes with individual fade/hold times
  • DMX compliance: USITT DMX512/1990
  • RDM compliance: ANSI/ESTA E1.20
  • Dimmer Resolution: 16-bit DMX control of intensity
  • DMX channels 4ft: 6/4/3/12/24 (standard/RAW/1 seg/4 seg/8 seg)
  • DMX channels 1ft: 6/4/3/6 (standard/RAW/1 seg/2 seg)

Optics

  • Light source: QUAD color LED (8 LEDs per foot)
  • Minimum LED lifetime: 50 000 hours (to >70% luminous output)*
  • Beam angle: 100°
  • Binning: Tight color and flux binning
  • Calibration: Full Gamut Color Calibration (1 step MacAdam ellipse)
  • *Figure obtained under manufacturer's test conditions

Construction

  • Housing: Aluminum
  • Finish: Clear anodized (standard) or optional colors on request
  • Front: Clear polycarbonate
  • Protection rating: IP66IK rating: IK08
  • Effective Projected Area (EPA): 0.04 m2 per ft
  • Corrosion resistance: C5 - very high corrosivity / Durability
  • Range: High (ISO 12944-6)
  • Vibration resistance: 1.0g, Sinusoidal (IEC 60068-2-6), 0.7g RMS Random (IEC 60068-2-64), 3.0g (ANSI C136-31)

Installation

  • Orientation: Any
  • Minimum distance to illuminated surfaces: 0.1 m / 0.3 ft.

Connections

  • Power/data in/thru: 8-pin custom connectors
  • Surge Protection: 4 KV
  • Maximum connected 4 ft fixtures *: 42 pcs (52 m /169 ft) @ 230-277 V
  • Maximum total string length (cable + fixtures)*: 150 m / 328 ft
  • * Refer to system diagram for details on fixture run limitations.
  • LWR*: 706 lm/kg (316 lm/lb)
  • *LWR = Lumen-to-Weight Ratio

Electrical

  • AC power: 100-277 V AC nominal, 50/60 Hz
  • Power supply unit: Auto-ranging electronic switch mode
  • Typical half-cycle RMS inrush current at 230 V, 50 Hz: 0.35 A        
  • Typical earth-leakage current 1 ft: 0.15 mA
  • Typical earth-leakage current 4 ft: 0.21 mA
  • Power Factor 12 W / 10 W mode: 0.95 @ 100 V / 120 V / 208 V / 230 V / 240 V , 
    0.90 @ 277 V
  • Power Factor 5 W mode: 0.90 @ 100 V / 120 V / 208 V / 230 V / 240 V , 0.70 @ 277 V
  • Power Consumption 1 ft
  • Maximum: 12 W / 10 W / 5 W *
  • Idle: 1.54 W *
  • Power Consumption 4 ft
  • Maximum: 48 W / 40 W / 20 W *
  • Idle: 2.30 W *
  • * Measurements made at nominal voltage. Allow for a deviation of +/- 10%.
  • Idle: steady state, all LEDs at zero intensity.
  • Power Consumption: Depending on power setting mode.

Thermal

  • Cooling: Convection
  • Total heat dissipation (calculated, +/- 10%): 41 BTU/hr. per foot
  • Maximum ambient temperature: 45° C (113° F)*
  • Minimum ambient temperature: -30° C (-22° F)
  • *Above this temperature, the fixture regulates output to protect from overheating

Environmental

  • RoHS: Compliant
  • REACH: Compliant
  • WEEE: Compliant
  • Proposition 65: Compliant
  • FSC: Certified cardboard inlay and outer packaging
  • Efficacy (max output): 50 lm/W

Approvals

  • Global CB Certification/IECEE: IEC 60598-2-5 (IEC 60598-1)
  • EU safety: EN 60598-2-5 (EN 60598-1), EN 62471, EN 62493
  • EU EMC: EN 55015, EN 55032, EN55035, EN 61547, EN 61000-3-2, EN 61000-3-3
  • US safety: ANSI/UL 1598
  • US EMC: 47 CFR Part 15 Class B
  • Canadian safety: CSA C22.2 No. 250.0
  • Australia/NZ: RCM
  • India: BIS IS 10322(Part5/section5)