Overview
The Atomic™ 3000 LED is the perfect blend of a traditional strobe and cutting-edge LED technology. Capitalizing on the original Atomic™ 3000 DMX’s 15 years of success, this new version features identical functionality and behaviour – with the added benefits of LED technology. It offers the same extreme brightness as its iconic predecessor, but with substantially lower peak power consumption.
The Atomic 3000 LED is not only a strobe, but also a creative tool that incorporates backlight illumination with RGB-controlled LEDs pointing into the reflector. It delivers stunning eye candy looks similar to the MAC Aura™ and the MAC Quantum™ Wash.
Internal FX macros and simplified re-use of the original Atomic Colors scroller complete the full-feature package and empower the Atomic 3000 LED to become the ultimate creative lighting tool.
- Brightest LED-based strobe on the market
- Unique RGB-controlled Aura backlight for stunning eye candy looks
- Same look and feel as the original Atomic 3000 DMX
Features
- Classic reflector look
- Iconic letterbox shape and industrial design
- Aura backlight (RGB) into reflector
- Dimmable house-light function at reduced brightness and power consumption
- LED and Xenon mode available via menu and DMX control channel
- Use of original Atomic color scroller made easy via internal power and data supply
- 4 button menu and LCD display for quick and easy setting adjustment
- Clever rigging and bracket solution
- 4 Channel DMX mode as Atomic 3000 (easy replacement)
- 14 Channel Extended DMX mode incl. Aura control and internal FX macros
- RDM compatible, USB port for software updates
Specifications
Physical
- Length: 245 mm (9.7 in.)
- Width: 425 mm (16.8 in.)
- Height: 240 mm (9.5 in.)
- Weight: 7.8 kg (17.2 lbs.)
- All data including mounting bracket
Dynamic Effects
- Strobe: 0.289 - 16.667 Hz, variable flash rate, intensity and duration
- Special effects: Blinder, ramp up/down, random flash, lightning. spikes, pre-programmed FX
- Aura (secondary LED array illumination) color mixing: RGB
Control and Programming
- Control systems: DMX, RDM
- Setting and addressing: Control panel with backlit monochrome graphic display
- DMX channels: 3/4/14
- Firmware update: USB memory key or via DMX with Martin™ M-DMX interface
- DMX compliance: USITT DMX512-A
- RDM compliance: ANSI/ESTA E1.20 RDM
- Transceiver: RS-485
Optics and Photometric Data
- Max. total output: 180,000 lumens*
- Beam (strobe) array:
Light source: 228 x Cree XLamp XP-L, 10 W white LEDs (color temperature 5,700 K)
Resolution: 8-bit
Dimming, above 16.7% output intensity: Current-controlled, flicker-free
Dimming, below 16.7% output intensity: PWM (refresh rate 6,000 Hz)
Minimum LED lifetime: 50,000 hours** - Aura (backlight) array:
Light source: 64 x Osram RGB LEDs
Resolution: 8 bits per color plus 8-bit dimming
Dimming: PWM (refresh rate 1,001 Hz)
Minimum LED lifetime: 50,000 hours** -
*For full photometric data, click on Photometrics in menu bar
**To >70% output, figure obtained under manufacturer’s test conditions
Construction
- Housing: Steel. high-impact thermoplastic, flame-retardant to UL 94 5VA
- Color: Black
- Protection rating: IP 20
Installation
- Mounting points: Two pairs of quarter-turn fastener points, M12 holes in adjustable bracket
- Location: Indoor use only, must be fastened to structure or surface
- Orientation: Any
- Minimum distance to combustible materials: 200 mm (8 in.) from fixture
- Minimum distance to illuminated surfaces: 1 m (3 ft. 4 in.) from fixture
Connections
- AC Power: Neutrik PowerCON TRUE1 male socket
- DMX data in/out: 5-pin locking XLR
- Atomic Colors color gel scroller: 4-pin locking XLR
- Software upload: USB 2.0
Electrical
- AC power: 100-240 V~ nominal, 50/60 Hz
- Power supply unit: Auto-ranging electronic switch mode
- Rated current consumption: 3.5 - 8.4 A
- Peak current consumption: 17.7 A
- Typical half-cycle RMS inrush current: 17.7 A
- Maximum power consumption: 740 W
Typical Power and Current
- 100 V, 60 Hz: 663 W, 6.8 A, PF 0.98
- 120 V, 60 Hz: 655 W, 5.7 A, PF 0.96
- 208 V, 60 Hz: 645 W, 3.5 A, PF 0.89
- 230 V, 50 Hz: 642 W, 3.2 A, PF 0.88
- 240 V, 50 Hz: 642 W, 3.1 A, PF 0.87
- Measurements made at nominal voltage with all LEDs at full strobe intensity. Allow for a deviation of +/- 10%. Allow for peak currents that exceed these figures when using the blinder effect. PF = power factor.
Thermal
- Cooling: Forced air (temperature-regulated, low noise, user-definable fan settings)
- Maximum ambient temperature (Ta max.): 40° C (104° F)
- Typical heat dissipation (calculated, +/- 10%): 2270 BTU/hr.
Approvals
- EU safety: EN 60598-2-17 (EN 60598-1), EN 62471, EN 62493
- EU EMC: EN 55103-1, EN 55103-2, EN 55015, EN 61547
- US safety: UL 1573
- Canadian safety: CSA E598-2-17 (CSA E60598-1)
- Australia/NZ: RCM (pending)
Accessories
- MAC Aura / Aura XB Soft Lens Kit:
Atomic Colors gel scroller: P/N 91611086
- Power cables:
Power Cable, H07RN-F Neutrik TRUE1-TRUE1 0.45 m (1.5 ft.): P/N 91611784
Power Cable, H07RN-F Neutrik TRUE1-TRUE1 1.2 m (3.9 ft.): P/N 91611785
Power Cable, H07RN-F Neutrik TRUE1-TRUE1 2.5 m (8.2 ft.): P/N 91611796
Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 1.5 m (4.9 ft.): P/N 91611797
Power input cable, H07RN-F, 2.5 mm2, 14 AWG, bare ends to Neutrik TRUE1 NAC3FX-W (female), 5 m (16.4 ft.): P/N 91611786 - Power connectors:
Cable Connector, Neutrik PowerCON TRUE1 NAC3MX-W (male): P/N 91611788
Cable Connector, Neutrik PowerCON TRUE1 NAC3FX-W (female): P/N 91611789 - Installation hardware:
Half-coupler clamp: P/N 91602005
G-clamp (vertical hanging installation only): P/N 91602003
Quick trigger clamp (vertical hanging installation only): P/N 91602007
Related Items
- Martin M-DMX (USB-DMX Interface Box for firmware uploads):
Martin™ M-PC 2U incl. Martin™ M-DMX Interface Box and USB cable: P/N 90737070
Martin M-PC Pro-64 / LJ-4 Controller kit: P/N 90737060 - Data link splitter-amplifiers:
Martin DMX 5.3 Splitter™: P/N 90758140
Martin RDM 5.5 Splitter™: P/N 90758150
Ordering Information
- Atomic 3000 LED™ in cardboard box: P/N 90425000