The Martin Audio DX4.0 is an advanced loudspeaker controller and system matrix with four input and eight output channels. Class-leading sonic performance is achieved by state-of-the-art audio converters and DSP algorithms, with a 96kHz sampling frequency delivering a nominally flat response beyond 40kHz.
Features
- Four input channels and eight output channels loudspeaker processor and matrix
- Analogue, AES3 and Danteâ„¢ digital audio inputs
- High performance 96kHz DSP
- Remote control and monitoring over Ethernet via Martin Audio VU-NET software
- FIR optimisation for Martin Audio’s O-Line
- VX limiting allows a passive enclosure the same protection as a fully active unit.
- Comprehensive suite of EQ’s, delays and all pass filters.
- Global mains operation 100-240V, 50-60Hz
Applications
- Loudspeaker system digital controller
- Front-of-house matrix to feed Dante digital audio to iKON amplifiers powering Martin Audio loudspeaker systems
- Use with Martin Audio O-Line for FIR Optimisation
- Use with Martin Audio U-Hub to feed digital audio and network to an MLA Series array/subwoofer array via a single cable
Specifications
| General | |
| TYPE | 4 input/8 output digital loudspeaker processor |
| OPERATING TEMPERATURE | 0 to 45°C |
| HUMIDITY RANGE | 0 to 80% RH (non-condensing) |
| Audio Performance | |
| INPUT IMPEDANCE | >10kΩ balanced |
| OUTPUT IMPEDANCE | <100Ω balanced |
| MAX INPUT LEVEL | +20dBu |
| MAX OUTPUT LEVEL | +18dBu into 600Ω |
| FREQUENCY RESPONSE | 10Hz - 40kHz |
| INPUT DYNAMIC RANGE | >120dBa typ. |
| OUTPUT DYNAMIC RANGE | >118dBa typ. |
| TOTAL HARMONIC DISTORTION | <0.008% typ. 20Hz-20kHz |
| Digital Signal Processing | |
| SAMPLE RATE | 96kHz |
| AES3 INPUT SAMPLE RATE | 28kHz – 108kHz |
| AES3 OUTPUT SAMPLE RATE | 96kHz |
| Power Supply | |
| AC OPERATING RANGE | 100-240V +/-10% |
| POWER CONSUMPTION | 30W |
| Control and Monitoring | |
| PROTOCOL | Ethernet |
| CONTROL APPLICATION | Martin Audio VU-NETâ„¢ |
| Connectors | |
| AUDIO INPUT | 4 x 3 pin female XLR for analogue or AES3 pairs |
| AUDIO OUTPUT | 8 x 3 pin male XLR for analogue or AES3 pairs |
| ETHERNET | 1 x shielded RJ45 |
| DANTEâ„¢ NETWORK | 2 x shielded RJ45, primary and secondary |
| AUX PORT | Phoenix connector for contact closure |
| MAINS POWER | 3 pin IEC |
| Physical | |
| DIMENSIONS |
|
| WEIGHT | 2.7Kg (6lbs) |
