Martin Audio ACS-40TS-W

Martin Audio ACS-40TS-W

Martin Audio ACS-40TS-W

Martin Audio ACS-40TS-W

2-Way Ceiling Loudspeaker. 4" LF, 0.75" HF. 180° conical coverage. 16-Ohm or 70V/100V. Tile rails and C-ring included, PAIR, WHITE

SKU: MARA-ACS-40TS-W
MSRP: $240.00

As part of the ADORN commercial loudspeaker series, the ACS-40TS is an ultra-compact, two-way ceiling speaker designed for background and foreground applications that require premium performance and cost competitiveness.

Features

  • High performance two-way ceiling speaker
  • 4” (100mm) LF driver and 0.75” (19mm) HF dome tweeter
  • Very wide 180° conical coverage pattern reduces speaker count required for even coverage
  • 70V/100V multitap line transformer or 16-ohm low-impedance operation
  • Low and high-frequency overload protection
  • UL94V-0 rated baffle with zinc-plated steel backcan
  • Quick release, bezel-less grille
  • Tile rails and C-ring included
  • 5-year warranty

Applications

  • Retail outlets
  • Cafes, bars and restaurants
  • Museums and Houses of Worship
  • Hotels, casinos and concourses
  • Transportation facilities
  • Boardrooms and reception areas

Specifications


TYPEUltra-compact, passive two-way ceiling speaker, ported bass reflex
FREQUENCY RESPONSE (1) 106Hz-20kHz ± 3dB
-10dB @ 73Hz
DRIVERS
  • LF: 4” /1” high-temp voice coil, coated paper cone, rubber surround, ferrite motor, pressed steel chassis
  • HF: 0.75” silk dome, neodymium motor
RATED POWER (2)40W AES, 160W peak
RECOMMENDED AMPLIFIER VIA2004 (for low-impedance operation)
SENSITIVITY(4) 86dB / 1W(4V) / 1m
MAXIMUM SPL (9) 108dB peak
NOMINAL IMPEDANCE16Ω
DISPERSION (-6dB)180° conical up to 10kHz
CROSSOVER3.5 kHz passive (LF and HF auto-resetting fuses)
TRANSFORMER TAPS
  • 70V: 20w / 10w / 5w / 2.5w
  • 100V: 20w / 10w / 5w
RECOMMENDED HIGH-PASS FILTER75Hz 24dB/oct
ENCLOSURE UL 94V-0 rated ABS baffle with steel backcan
FINISH Baffle and grille: RAL9016 white Backcan: zinc plated
GRILLE Perforated steel, powder-coated, bayonet fitting
CONNECTORS Ceramic connector (in and link) located behind fire-retardant steel cover
ACCESSORIES (included)
  • 2 tile rails
  • C-ring backing plate
  • Cut-out template
DIMENSIONS
  • (OD) 221mm x (D) Back Can 97mm, (D) Inc. Grille 115mm
  • (OD) 8.7in x (D) Back Can 3.81in, (D) Inc. Grille 4.51in
HOLE CUT-OUT DIMENSION197mm (7.75”) diameter
WEIGHT 2.2kg (4.8lbs)