Overview

Digital Matrix Audio Processor, 24 In, 12 Out, Aspen Net.The variety of mixers available are created by combining “building block” printed circuit board assemblies

8 input, 12 output mixer board

16 channel input only board

8 channel input only board

Multiple chassis of any 1RU or 2RU model can be stacked to expand the number of inputs and outputs needed for the system design. The ASPEN digital matrix provides a maximum of 48 total outputs, but there is no limit to the number of inputs that can be added to a system by stacking multiple units.

Mixer models include-

SPN812 8 input, 12 output mixer, 1 RU

SPN1612 16 input, 12 output mixer, 2 RU

SPN1624 16 input, 24 output mixer, 2 RU

SPN2412 24 input, 12 output mixer, 2 RU

Input only models include-

SPN16i 16 channel , 1 RU 

SPN32i 32 channels, 2 RU

Input only units deliver outputs to the digital bus, so they are always used with a host mixer or conference unit to provide physical audio outputWhen multiple units are stacked, Master and Slave units are automatically detected and configured. All data and audio from the Slave units in the system is gathered in the Master, so a single connection between a computer and the Master allows access to all units in the stack. The throughput latency of all audio inputs in a stack is automatically synchronized to maintain absolute signal phase at the audio outputs. All models fully support the 48 outputs provided by the digital matrix, regardless of how many physical outputs are present on the rear panel. Any physical output can deliver the signal from any output in the matrix. Extensive, simultaneous control can be applied through ethernet, USB, RS-232 and logic I/O ports using the large command library. Combined with the comprehensive macro library, control options are available to meet a very wide range of requirements and user interfaces.

Features

• Ultra low noise input preamps

• Full crosspoint matrix with 48 outputs

• Unlimited input expansion

• TCP/IP Ethernet addressable

• Seamless auto-mixing with PGA™ at the matrix crosspoints

• Simultaneous multi-point 3rd party and native control

• Ultra-low latency

• Automatic Master/Slave detection

• Single CAT6 interconnection carries data, audio and control signals

Specifications