LEA CS64

LEA CS64

LEA CS64

LEA CS64

4CH x 60W @ 4Ω, 8Ω, 70V and 100V per channel • Compact and powerful—the most feature-rich half-rack amplifier in the industry, with onboard DSP, LEA Cloud, WebUI, SharkWare and more • Fully routable analog balanced, unbalanced, and mic inputs

SKU: LEA-CS64
MSRP: $1,300.00
MAP: $1,300.00

Overview

The CONNECTSERIES 64 is a 4-channel amplifier with 60 watts per channel in a ½ rack space form factor. As part of the Network CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, it is perfectly suited for small to medium-scale installations. The 64 features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable.

Specifications

Audio

  • Output Power 4 x 60 WRMS @ 4Ω, 8Ω, 70V, 100V (30W at 2Ω)
  • Inputs: Analog: 4 Balanced analog Inputs with user-selectable 26dB, 34dB, and mic level input sensitivity4 Unbalanced RCA inputs with user-selectable 26dB and 34dB input sensitivity*** Note - Unbalanced and RCA inputs share the same analog input channel
  • THD+N 0.1% (20Hz to 20kHz)
  • Frequency Response +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω
  • Signal to Noise Level 102dB (20Hz to 20kHz referenced to 8Ω)
  • Crosstalk 70dB (20Hz to 20kHz)
  • I/O Latency 1 ms DSP latency under any condition
  • Load Impedance LowZ down to 2 ohms, 70V direct, and 100V Direct per channel
  • Output Classification Class D with Proprietary Smart Power Bridge Technology allowing bridgedoutput functionality without sacrificing an amplifier channel
  • DC Offset +/- 3mV

DSP

  • DSP Architecture Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
  • Input Matrix Routable matrix; any input to any outputwith primary and secondary input priority
  • Crossovers Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth) and Bessel
  • Parametric EQ 8 Band Parametric EQ per channel
  • Output Delay 100ms per channel
  • Output Protection DC, VHF, and AC Mains Protection, Over-temp and Current Limiter, fan fault detection
  • Limiting Peak Voltage and RMS Voltage
  • Load Monitoring Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources

CONTROL, MONITORING, NETWORK

  • Network Connectivity Wi-Fi or 100MB Ethernet with PoE or Built-in Wi-Fi Access Point(IEEE 802.11 b/g/n WPA, WPA2, WEP)
  • User Interface Web Browser User Interface, 3rd Party API control, Cloud control, or SharkWare
  • Operating Systems MAC, iOS, PC, Android
  • Event Reporting User Downloadable and Viewable Event and Fault log - POE allows for enhanced error monitoring
  • External I/O External I/O In: Toggles Remote On/Off | External I/O Out: Indicates Amplifier Health4 general-purpose Input and Output pins for general inputTriggering and output statuses: Coming soon
  • Cloud IoT AWS Cloud-based IoT functionality

OPS DATA

  • AC Mains 100VAC - 240VAC +/- 15% 50Hz or 60Hz
  • Temperature Storage: -20°C to 90° C - Operating: 0°C to 60° C
  • Power Supply Universal Switch Mode Power Supply
  • Safety Approvals UL, CSA, CE, ETL, FCC, CCC, KETI, NOM, ROHS, PSE

PHYSICAL

  • Dimensions (L x W x H) Product: 11.82” x 8.58” x 1.71” (300.11mm x 278mm x 43.5mm)Shipping: 18” x 11” x 2.75” (457.2mm x 300mm x 69.85mm)
  • Weight 7lbs / 3.1kg | Shipping: Coming Soon
  • Cooling Front to Rear Variable Fan Speed Cooling | Fan Noise at idle is 50dB @1mFan Noise at 50% is 57dB @1m Fan Noise at full speed is 63dB @1m
  • Connectors Analog Input: 3 pin Amphenol Anytek, Output: 2 pin Amphenol Anytek,External IO: 8 pin Amphenol Anytek, Power in: IEC, Ethernet RJ45 In for Control, and RCA input