LEA CS352D-ADSP

LEA CS352D-ADSP

LEA CS352D-ADSP

LEA CS352D-ADSP

2CH x 350W @ 4Ω, 8Ω, 70V and 100V per channel, LEA’s most advanced DSP—ideal for high-performance applications, Includes Dante and AES67 connectivity, 96kHz linear phase FIR crossover filters with 2,048 taps per channel, Four seconds of input delay

SKU: LEA-CS352D-ADSP
MSRP: $2,812.00
MAP: $2,812.00

Overview

The DANTE CONNECTSERIES 352D-ADSP is a 2-channel amplifier with 350 watts per channel, perfectly suited for high-performance applications. The CS352D-ADSP boasts impressive features, including 96kHz linear phase FIR crossover filters with 2048 taps per channel, providing precise audio control. Additionally, it offers 4 seconds of input delay and powers on to audio in under 10 seconds when using PoE. The FIR-based speaker tunings further enhance the audio experience, ensuring unparalleled performance and reliability.

Then there’s the Cloud…The CONNECTSERIES is the first professional amplifier family to feature Cloud connectivity. Harness the power of the Cloud for remote control, monitoring, notifications and more from any of your personal devices. Just connect your amp to a network and start commanding your systems.

The DANTE CONNECTSERIES features both analog and Dante inputs, as well as external I/O control for remote on/off and fault monitoring. It also includes compatibility with both Dante and AES67.

Specifications

Audio

  • Output Power: 2 x 350 WRMS Per Channel @ 4Ω, 8Ω, 70V, 100V | 175 Watts @ 2Ω
  • Input:
    • 2 Analog Balanced Inputs with user-selectable 26dB and 34dB input sensitivity
    • Dante: 8 x 8 Dante @ 96kHz or 48kHz, Multicast or Unicast
    • AES67: Configurable via the Dante Controller Software
  • THD+N: 0.1% (20Hz to 20kHz)
  • Frequency Response: +/- 0.5dB @ 4Ω, 8Ω, 70V, 100V | -2.5dB @ 20kHz @ 2Ω
  • Signal to Noise Level: 105dB (20Hz to 20kHz referenced to 8Ω)
  • Crosstalk: 70dB (20Hz to 20kHz)
  • I/O Latency: 3.2ms DSP latency with no FIR Coefficients loaded
  • Load Impedance: LowZ down to 2Ω, 70V Direct, and 100V Direct per channel
  • Output Classification: Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality on 1 channel without sacrificing an amplifier channel
  • DC Offset: +/- 3mV

DSP

  • DSP Architecture: Analog Devices Sharc 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
  • Input Matrix: Routable matrix; any input to any output with primary and secondary input priority
  • Crossovers: Up to 48dB/Octave IIR Filters (Linkwitz Riley and Butterworth and Bessel). FIR filters (24db/oct & 48db/oct Linkwitz Riley, Linear Phase Brickwell, and ability to load FIR Coefficients – 2048 taps per channel @96 KHZ)
  • Parametric EQ: 8 Band Parametric EQ per channel
  • Output Delay: 4 Seconds per channel
  • Output Protection: DC, VHF, and AC Mains Protection, Over-temp and Current Limiter, fan fault detection
  • Limiting: Peak Voltage and RMS Voltage
  • Load Monitoring: Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources

CONTROL, MONITORING,NETWORK

  • Network Connectivity: Wi-Fi or 100MB Ethernet with PoE or Built in Wi-Fi Access Point (IEEE 802.11 b/g/n WPA, WPA2, WEP)
  • User Interface: Web Browser User Interface, 3rd Party API Control, LEA Cloud or SharkWare
  • Operating Systems: WebUI - (MAC, IOS, PC, Android, Linux), SharkWare – MAC & PC
  • Event Reporting: User Downloadable and Viewable Event and Fault log - POE allows for enhanced error monitoring
  • External I/O: External I/O In: Toggles Remote On/Off | External I/O Out: Indicates Amplifier Health
  • Cloud IoT: AWS Cloud based IoT functionality via LEA Professional Cloud

OPS DATA

  • AC Mains: 100VAC - 240VAC +/- 15% 50Hz or 60Hz
  • Temperature: Storage: -20°C to 90°C - Operating: 0°C to 60°C
  • Power Supply: Universal Switch Mode Power Supply
  • EN54-16 Output Power: 304 Watts @ 9.6Ω (40°C ambient temp for 1 minute)
  • Smart Power Bridge: 469 Watts @ 9.6Ω (40°C ambient temp for 1 minute)
  • Safety Approvals: UL, CSA, CE, ETL, FCC, CCC, KETI, NOM , ROHS, PSE, EN54-16

PHYSICAL

  • Dimensions (L x W x H): Product: 14.25” x 19” x 1U (362mm x 482mm x 1U) x 1U (362mm x 482mm x 1U)
    Shipping: 20” x 22.75” x 3.75” (508mm x 578mm x 95.25mm)
  • Weight: 10lbs / 3.4kg | Shipping: 18.7lbs / 8.5kg
  • Cooling: Front to Rear Variable Fan Speed Cooling | Fan Noise at idle is 50dB @1m | Fan Noise at 50% is 57dB @1m
    Fan Noise at full speed is 63dB @1m
  • Connectors: Analog Input: 3 pin Amphenol Anytek, Output: 2 pin Amphenol Anytek, External IO: 8 pin Amphenol Anytek, Ethernet RJ45 In for Control, Primary and Secondary RJ45 in for Dante