LEA CONNECT 34

4 Channel x 30 watt @ 4Ω, 8Ω, 70V and 100V per channel. Internal DSP w/Crossovers, IoT Device with built in Wi-Fi Hotspot, Wi-Fi or FAST Ethernet connectivity. Highly Efficient Power Supply with Class D Output Stage.

SKU: LEA-CS34

MSRP: $1,100.00

MAP: $1,100.00

Description

Overview

The CONNECTSERIES 34 is a 4-channel amplifier with 30 watts per channel in a ½ rack space form factor. As part of the Dante CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, it is perfectly suited for small to medium-scale installations. The 34 features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable.

Specifications

AUDIO

Output: Power 4 x 30 WRMS @ 4Ω, 8Ω, 70V, 100V (15W at 2Ω)
Inputs: Analog: 4 Balanced analog Inputs with user-selectable 26dB, 34dB, and mic level input sensitivity 4 Unbalanced RCA inputs with user-selectable 26dB and 34dB input sensitivity ***Note - Unbalanced and RCA inputs share the same analog input channel
THD+N: 0.1% (20Hz to 20kHz)
Frequency Response: +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω
Signal to Noise Level: 102dB (20Hz to 20kHz referenced to 8Ω)
Crosstalk: 70dB (20Hz to 20kHz)
I/O Latency: 1 ms DSP latency under any condition
Load Impedance: LowZ down to 2 ohms, 70V direct, and 100V Direct per channel
Output: Classification Class D with Proprietary Smart Power Bridge Technology allowing bridgedoutput functionality without sacrificing an amplifier channel
DC Offset: +/- 3mV

DSP

DSP Architecture: Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
Input Matrix: Routable matrix; any input to any output with primary and secondary input priority
Crossovers: Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth) and Bessel
Parametric EQ: 8 Band Parametric EQ per channel
Output Delay: 100ms per channel
Output Protection: DC, VHF, and AC Mains Protection, Over-temp and Current Limiter, fan fault detection
Limiting: Peak Voltage and RMS Voltage
Load Monitoring: Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources

CONTROL, MONITORING, NETWORK

Network Connectivity: Wi-Fi or 100MB Ethernet with PoE or Built in Wi-Fi Access Point(IEEE 802.11 b/g/n WPA, WPA2, WEP)
Operating Systems: MAC, iOS, PC, Android
User Interface: Web Browser User Interface, 3rd Party API control, Cloud Control, or SharkWare
Event Reporting: User Downloadable and Viewable Event and Fault log - POE allows for enhanced error monitoring
External I/O: External I/O In: Toggles Remote On/Off | External I/O Out: Indicates Amplifier Health 4 general-purpose Input and Output pins for general inputTriggering and output statuses: Coming soon
Cloud IoT: AWS Cloud-based IoT functionality

OPS DATA

AC Mains: 100VAC - 240VAC +/- 15% 50Hz or 60Hz
Temperature: Storage: -20°C to 90° C - Operating: 0°C to 60° C
Power Supply: Universal Switch Mode Power Supply
Safety Approvals: UL, CSA, CE, ETL, FCC, CCC, KETI, NOM, ROHS, PSE

PHYSICAL

Dimensions: (L x W x H) Product: 11.82” x 8.58” x 1.71” (300.11mm x 278mm x 43.5mm)Shipping: 18” x 11” x 2.75” (457.2mm x 300mm x 69.85mm)
Weight: 7lbs / 3.1kg | Shipping: Coming Soon
Cooling: Front to Rear Variable Fan Speed Cooling | Fan Noise at idle is 50dB @1mFan Noise at 50% is 57dB @1m | Fan Noise at full speed is 63dB @1m
Connectors: Analog Input: 3 pin Amphenol Anytek, Output: 2 pin Amphenol Anytek,External IO: 8 pin Amphenol Anytek, Power in: IEC, Ethernet RJ45 In for Control, and RCA input