LEA CONNECT 1504-G

4 Channel x 1500 w @ 4Ω, 8Ω, 70V & 100V per channel. Wi-Fi removed for Govt & other applications where Wi-Fi is prohibited. Advanced DSP w/FIR Crossovers, IoT Device w/ FAST Ethernet connectivity. Highly Efficient Power Supply w/ Class D Output Stage

SKU: LEA-CS1504-G

MSRP: $6,696.00

MAP: $6,696.00

Description

Overview

Introducing the CONNECTSERIES 1504-G high-power IoT-enabled smart amp. This four-channel model drives 1,500 watts per channel (into 2, 4, and 8 ohms as well as 70Vrms and 100Vrms). Avaliable in Network and Dante, it’s important to note that the CONNECTSERIES 1504-G is designed exclusively for wired LAN connections and do not support Wi-Fi connectivity.

Specifications

Audio

Output Power 4 x 1500 WRMS Per Channel @ 2Ω, 4Ω, 8Ω, 70V, 100V | 750 Watts @ 25V
Input 4 Analog: Balanced Inputs with user selectable 26 dB and 34 dB input sensitivity
THD+N 0.1% (20Hz to 20kHz)
Frequency Response +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω
Signal to Noise Level 105dB (20Hz to 20kHz referenced to 8Ω)
Crosstalk 70dB (20Hz to 20kHz)
I/O Latency 3.2ms DSP latency with no FIR Coefficients loaded
Load Impedance LowZ down to 2 ohms, 70V direct, and 100V Direct per channel
Output Classification Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality on 2 channels without sacrificing an amplifier channel
DC Offset +/- 3mV

DSP

DSP Architecture Analog Devices Sharc 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
Input Matrix Routable matrix; any input to any output with primary and secondary input priority
Crossovers Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth and Bessel). FIR filters (24db/oct & 48db/oct Linkwitz Riley, Linear Phase Brickwell, and ability to load FIR Coefficients – 2048 taps per channel @96 KHZ)
Parametric EQ 8 Band Parametric EQ per channel
Output Delay 4 Seconds per channel
Output Protection DC, VHF, and AC Mains Protection, Over-temp and Current Limiter, fan fault detection
Limiting Peak Voltage and RMS Voltage
Load Monitoring Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources

CONTROL, MONITORING, NETWORK

Network Connectivity Wi-Fi or 100MB Ethernet with PoE or Built in Wi-Fi Access Point (IEEE 802.11 b/g/n WPA, WPA2, WEP)
User Interface Web Browser User Interface, 3rd Party API Control, LEA Cloud or SharkWare
Operating Systems Web UI - (MAC, IOS, PC, Android, Linux), SharkWare – MAC & PC
Event Reporting User Downloadable and Viewable Event and Fault log - POE allows for enhanced error monitoring
External I/O External I/O In: Toggles Remote On/Off | External I/O Out: Indicates Amplifier Health
Cloud IoT AWS Cloud based IoT functionality via LEA Professional Cloud

OPS DATA

AC Mains 100VAC - 240VAC +/- 15% 50Hz or 60Hz
Temperature Storage: -20°C to 90° C - Operating: 0°C to 60° C
Power Supply Universal Switch Mode Power Supply
EN54-16 Output Power 1218 Watts @ 9.6Ω (40° C ambient temp for 1 minute) Smart Power Bridge: 1884 Watts @ 9.6Ω (40° C ambient temp for 1 minute)
Safety Approvals UL, CSA,CE, ETL, FCC, CCC, KETI, NOM , ROHS, PSE, EN54-16

PHYSICAL

Dimensions (L x W x H) Product: 17.25” x 19” x 2U (438mm x 482mm x 2U) Shipping: 22” x 22.75” x 8” (578mm x 203mm x 559mm)
Weight 28lbs / 12.7kg | Shipping: 30lbs / 13.6kg
Cooling Front to Rear Variable Fan Speed Cooling | Fan Noise at idle is 50dB @ 1m | Fan Noise at 50% is 57dB @1m Fan Noise at full speed is 63dB @1m
Connectors Analog Input: 3 pin Amphenol Anytek, Output: 2 pin Amphenol Anytek, External IO: 8 pin Amphenol Anytek, power cord (32A Neutrik Powercon to L6-30p), Ethernet RJ45 In for Control, Primary and Secondary RJ45 in for Dante