LEA CONNECT 124D

4 Channel x 120 watt @ 4Ω, 8Ω, 70V and 100V per channel. Internal DSP w/Crossovers and Dante, IoT Device with built in Wi-Fi Hotspot, Wi-Fi or FAST Ethernet connectivity. Highly Efficient Power Supply with Class D Output Stage.

SKU: LEA-CS124D

MSRP: $1,800.00

MAP: $1,800.00

Description

Overview

The CONNECTSERIES 124D is a 4-channel amplifier with 120 watts per channel in a ½ rack space form factor. As part of the Dante CONNECTSERIES, the world’s first Internet of Things- (IoT) enabled professional-grade amplifiers, it is perfectly suited for small to medium-scale installations. The 124D features direct HiZ (70V or 100V) or LoZ selectable by channel. With three ways to connect, you can engage the built-in Wi-Fi access point, connect to the venue’s Wi-Fi, or use the FAST Ethernet to connect to any local area network via Cat5 or Cat6 cable.

Specifications

Audio

Output Power 4 x 120 WRMS @ 4Ω, 8Ω, 70V, 100V (60W at 2Ω)
Inputs Analog: 4 Balanced analog Inputs with user-selectable 26dB, 34dB, and mic level input sensitivity 4 Unbalanced RCA inputs with user-selectable 26dB and 34dB input sensitivity ***Note – Unbalanced and RCA inputs share the same analog input channel Dante: 4x4 Dante at 48kHz, Multicast, or Unicast AES 67: Configurable via the Dante Controller Software
THD+N 0.1% (20Hz to 20kHz)
Frequency Response +/- 0.5 dB @ 4Ω, 8Ω, 70V, 100V, -2.5dB @ 20kHz at 2Ω
Signal to Noise Level 102dB (20Hz to 20kHz referenced to 8Ω)
Crosstalk 70dB (20Hz to 20kHz)
I/O Latency 1 ms DSP latency under any condition
Load Impedance LowZ down to 2 ohms, 70V direct, and 100V Direct per channel
Output Classification Class D with Proprietary Smart Power Bridge Technology allowing bridged output functionality without sacrificing an amplifier channel
DC Offset +/- 3mV

DSP

DSP Architecture Analog Devices Sigma 96kHz DSP Processor with 32-bit Core with Sample Rate Converters
Input Matrix Routable matrix; any input to any output with primary and secondary input priority
Crossovers Up to 48 dB/Octave IIR Filters (Linkwitz Riley and Butterworth) and Bessel
Parametric EQ 8 Band Parametric EQ per channel
Output Delay 100ms per channel
Output Protection DC, VHF, and AC Mains Protection, Over-temp and Current Limiter, fan fault detection
Limiting Peak Voltage and RMS Voltage
Load Monitoring Realtime Load Monitoring and Pilot Tone Detection from Internal or External Sources

CONTROL, MONITORING, NETWORK

Network Connectivity Wi-Fi or 100MB Ethernet with PoE or Built-in Wi-Fi Access Point (IEEE 802.11 b/g/n WPA, WPA2, WEP)
User Interface Web Browser User Interface, 3rd Party API control, Cloud Control, or SharkWare
Operating Systems MAC, iOS, PC, Android
Event Reporting User Downloadable and Viewable Event and Fault log - POE allows for enhanced error monitoring
External I/O External I/O In: Toggles Remote On/Off | External I/O Out: Indicates Amplifier Health 4 general-purpose Input and Output pins for general input Triggering and output statuses: Coming soon
Cloud IoT AWS Cloud-based IoT functionality

OPS DATA

AC Mains 100VAC - 240VAC +/- 15% 50Hz or 60Hz
Temperature Storage: -20°C to 90° C - Operating: 0°C to 60° C
Power Supply Universal Switch Mode Power Supply
Safety Approvals UL, CSA, CE, ETL, FCC, CCC, KETI, NOM, ROHS, PSE

PHYSICAL

Dimensions (L x W x H) Product: 11.82” x 8.58” x 1.71” (300.11mm x 278mm x 43.5mm) Shipping: 18” x 11” x 2.75” (457.2mm x 300mm x 69.85mm)
Weight 7lbs / 3.1kg | Shipping: Coming Soon
Cooling Front to Rear Variable Fan Speed Cooling | Fan Noise at idle is 50dB @1m Fan Noise at 50% is 57dB @1m | Fan Noise at full speed is 63dB @1m
Connectors Analog Input: 3 pin Amphenol Anytek, Output: 2 pin Amphenol Anytek, External IO: 8 pin Amphenol Anytek, Power in: IEC, Ethernet RJ45 In for Dante, and RCA input