Lab Gruppen LUCIA 60/1-70_US1

Lab Gruppen LUCIA 60/1-70_US1

Lab Gruppen LUCIA 60/1-70_US1

Lab Gruppen LUCIA 60/1-70_US1

Compact Mono 60W Amplifier for High-Impedance 70 V Installation Applications

SKU: LAB-LUCIA60/1-70
MSRP: $529.00

Overview

Compact Mono 60 W Amplifier for High Impedance 70 V Installation Applications

Features

  • Compact mono amplifier which offers 60 W for high impedance speakers on 70 V distribution lines
  • Comprehensive on-board DSP with loudspeaker processing and innovative features which enhance performance and simplifies system design and commissioning
  • Configuration software wizard for initial set-up and advanced editor for preset configuration (LUCIA connection via USB) available for Windows and Mac
  • Energy efficient with Energy Star certification for supreme green credentials and exceptionally low lifetime running costs
  • Automatic Dynamic Loudness Contouring adapts to optimize performance at any output level
  • Comprehensive DSP features with per-channel presets for high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter
  • Optimized presets available for a wide range of loudspeaker models for fast configuration
  • Enhanced Bass Profile for extended LF response with small loudspeakers
  • Proprietary Auto Load Sense automatically sets VPL (Voltage Peak Limiter) for optimum performance with any connected load
  • Efficient Class-D amplifier with low distortion and minimal heat dissipation
  • Compact form factor in a half-rack, 1U chassis with supplied bracket for discreet on-wall mounting
  • Configurable GPIO port for remote control (e.g. wall panel) for channel switching, level control and integration with paging systems
  • Comprehensive circuit protection for fail safe operation, including short circuit, thermal and undervoltage protection
  • Universal power supply supports 100 - 240 V AC at 50 or 60 Hz
  • Intelligent fan control for silent operation at idle and at lower output levels
  • Front panel power and fault indication as well as per-channel signal LED and attenuation knob
  • Balanced high quality analog inputs and amplifier outputs on detachable screw terminals
  • Parallel analogue input on unbalanced RCA connectors with optimized gain for mobile and other unbalanced sources

LUCIA 60/1-70

LUCIA 60/1-70 Incorporates Ease of Install with 60 W of Decentralised Power in a Compact Energy Star Compliant Amplifier.

Great Sound, Flexibility and Ease of Use

Lab Gruppen’s innovative LUCIA (Localized Utility Compact Intelligent Amplification) brings superior audio performance and extraordinary flexibility to a decentralized approach in AV systems design. Power, processing, control and I/O are conveniently placed exactly where they are needed. In many AV applications requiring consistently outstanding performance, LUCIA offers a logical, cost-efficient and scalable solution that often eliminates the complications and added expense of a centralized equipment room. LUCIA amplifiers incorporate a digital, firmware-controlled front end coupled to a robust, durable and highly efficient Lab Gruppen output stage, all of which make LUCIA the best-sounding and most reliable compact amplifier in its category.

Fits in Anywhere

LUCIA 60/1-70 has been designed and engineered for quick installation and easy setup. The supplied wall-mount bracket enables discreet on-wall location (such as behind video displays), but the ultra-compact form factor also allows easy placement virtually anyplace – whether next to a projector or integrated into a reception counter, podium and lectern or bar area. All input and output connections are on Euroblock screw terminals (with parallel unbalanced RCA connectors), and level setting is available on front-panel potentiometers. Advanced circuitry protects the amplifier and connected loudspeakers from potential damage caused by clipping, thermal overload, or extreme low line voltage.

Integrated Mix-Matrix and DSP Front End

The LUCIA 60/1-70 incorporates a digital front end with a 2 x 1 Mix Matrix and comprehensive DSP features, including proprietary Automatic Dynamic Loudness Contouring (ADLCTM) and a full selection of EQ filters both before and after the matrix – features that eliminate the need for external mixers and processors in many applications, saving time and money. A software wizard facilitates fast setup, while the advanced editor allows offline configuration of common presets that can be quickly downloaded to multiple units via USB.

Green Credentials

LUCIA amplifiers are Energy Star qualified, making them an ideal choice for installation in projects seeking energy efficient certifications. The amplifiers automatically enter standby mode after a 20 minute period with no signal input, consuming less than 1 watt. Automatic power-up occurs within two seconds after an input signal is sensed.

Energy Star Qualified

By maintaining very low current draw during operating cycles even at high output levels, and reduced power consumption during non-operational cycles, our Energy Star qualified products harness impeccable Lab Gruppen sonic performance and robust power output while meeting the rigorous efficiency requirements of current Energy Star certification standards.

ADLC for Great Sound, Everytime.

By maintaining very low current draw during operating cycles even at high output levels, and reduced power consumption during non-operational cycles, our Energy Star qualified products harness impeccable Lab Gruppen sonic performance and robust power output while meeting the rigorous efficiency requirements of current Energy Star certification standards.

Third Party Control

Once installed the LUCIA can be controlled and monitored either via GPIO or more extensively using that RS232 interface that is included. The protocol used is open and free for anyone to implement. The list of companies supporting it is growing.

ADLC for Great Sound, Everytime

Automatic Dynamic Loudness Contouring ensures a fuller and comfortable listening experience – especially at low perceived levels. Based on industry leading technology from TC Electronic, ADLC ensures that LUCIA makes the best of what comes into the system regardless of output gain (or “volume”).

Specification

General
Number of amplifier channels

1

Max total output all channels driven

60 W

Max output voltage

100 Vpeak

Max output Current

1.8 Arms

Performance
70 V

60 W

100 V 1

30 W

16 ohms

60 W

Signal to Noise Ratio

>100 dBA

Gain, Sensitivity and Limiters
VPL

100 Vpeak

Sensitivity, balanced input

4 dBu / 1.23 Vrms

Sensitivity, RCA input

-2 dBu / 0.62 Vrms

Input headroom for clip, balanced 2

12 dBu / 3.09 Vrms

Input headroom for clip, RCA 2

6 dBu / 1.55 Vrms

Connectors and Buttons
GPO (power state output) 3

Contact closure type, 2 pins in a detachable screw terminal Default for external monitoring of fault/protection/power off

USB

For firmware update and configuration with the Application Browser software

Connectors and Switches
Input connectors (per ch.)

3 - pin detachable screw terminals, electronically balanced

Input connectors (ch. 1 & 2)

Unbalanced RCA type

Output connector

2 - pin detachable screw terminal

GPI 3

2 channels of voltage sense type. 4 pins in a detachable screw terminal. Default functionality is output level for GPI1 and wake up from stand by for GPI2.

RS232

Can be controlled and monitored by third parties via RS232 using both the GPI pins

High pass filter

This filter is in series with the other filters in the DSP and it is controlled with switches on the back. Settings OFF / 50 Hz / 80 Hz.

Level adjustment (per input)

Front panel potentiometer, detented from -inf to 0 dB

Processing Features
Input processing block 4

4 EQ sections per input

Mix matrix routing block 4

2 in - 1 out mix-matrix controllable from GPI

Output processing block 4

4 EQ sections per output (presets available for many loudspeakers) User adjustable output look ahead limiter ADLC (Adaptive ISO 226 compensation)

Latency from any input to any output

User adjustable from 9.15 to 137 ms

Power
Nominal voltage

100 – 240 VAC

Operating voltage

85 – 265 VAC

Standby consumption

<1 W

Mains connector

IEC inlet

Cooling

One fan, no filter required, front to rear airflow, temperature controlled speed. Can stay off if the sustained power average stays below 12 W and the ambient temperature is below 25 C

Auto mode

The power state is controlled automatically by the audio signal

Dimensions
Dimensions

W: 216 mm (8.5”), H: 44 mm (1 U), D: 280 mm (11”)

Weight
Weight

1.9 kg (4.2 lbs)

Finish
Finish

Black aluminum front and black steel chassis