LUCIA 240/2M Incorporates Ease of Install with 2 X 120 W of Decentralized Power in a Compact, Energy Star Compliant Amplifier.

Features:

• Compact matrix amplifier which offers full output power across a range of loads with 2 x 120 W into 8, 4 or 2 Ohms
• Comprehensive on-board DSP with loudspeaker processing and innovative features which enhance performance and simplifies system design and commissioning
• 4 x 4 matrix allows mixing and routing all inputs to amplifier output channels and 2 balanced line level outputs
• Configuration software wizard for initial set-up and advanced editor for preset configuration (LUCIA connection via USB) available for Windows* and Mac*
• Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
• Automatic Dynamic Loudness Contouring adapts to optimize performance at any output level
• Comprehensive DSP features with per-channel presets for high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter
• Optimized presets available for a wide range of loudspeaker models for fast configuration
• Enhanced Bass Profile for extended LF response with small loudspeakers
• Proprietary Auto Load Sense automatically sets VPL (Voltage Peak Limiter) for optimum performance with any connected load
• Efficient Class D amplifier with patented design for low distortion and minimal heat dissipation

• Compact form factor in a half-rack, 1U chassis with supplied bracket for discreet on-wall mounting
• Configurable GPIO port for remote control (e.g. wall panel) for channel switching, level control and integration with paging systems
• Comprehensive circuit protection for fail safe operation, including short circuit, thermal and under-voltage protection
• Universal power supply supports 100
  - 240 V AC at 50 or 60 Hz
• Intelligent fan control for silent operation at idle and at lower output levels
• Front panel power and fault indication as well as per-channel signal LED and attenuation knob
• Balanced high quality analog inputs and amplifier outputs on detachable screw terminals
• Parallel analogue input on unbalanced RCA connectors with optimized gain for mobile and other unbalanced sources
• Rackmount kit, pole-mount kit and wall panel kits available as accessories
• 10-Year Warranty Program*
• Designed and engineered in Sweden

Specs:

Specs:
Number of Channels 2
Total Output Power 240 W
Peak Output Voltage 43.8 V peak
Maximum Output Current 7.8 Arms
Maximum Output Power 2 Ohms: 120 W
4 Ohms: 120 W
8 Ohms: 120 W
16 Ohms: 60 W
THD THD 20 Hz to 20 kHz at 1 W into 8 Ohms: <0.3%
THD at 1 kHz and 1 dB Below Clipping: <0.2%
Signal to Noise Ratio >101 dBA
Crosstalk Channel Separation (Crosstalk) at 1 kHz: >60 dB
Frequency Response 5 Hz to 22 kHz
Input Impedance 10 kOhms
CMR Common Mode Rejection (CMR): 40 dB
Limiter VPL for 16 Ohm Mode: 43.8 Vpeak
VPL for 8 Ohm Mode: 43.8 Vpeak
VPL for 4 Ohm Mode: 31 Vpeak
VPL for 2 Ohm Mode: 22 Vpeak
Sensitivity Balanced Input: 4 dB / 1.23 Vrms
RCA Input: -2 dBu / 0.62 Vrms
Headroom Input Headroom for Clip (Balanced): 12 dBu / 3.09 Vrms
Input Headroom for Clip (RCA): 6 dBu / 1.55 Vrms
Input Connector Input Connectors (Per Channel): 3-pin detachable screw terminals, electronically balanced
Input Connectors (Channel 1 & 2): Unbalanced RCA type
Output Connector 2-pin detachable screw terminals
Line-Level Output (Channel 3 & 4): 3-pin detachable screw terminals, electronically balanced
GPI Input GPI (Power State Input): 2 channels of voltage-sense type. 4 pins in a detachable screw terminal. Default for gain.
GPO Output GPO (Power State Output): Contact closure type, 2 pins in a detachable screw terminal. Default for external monitoring of fault/protection/power off
USB For firmware update and configuration for the matrix models
RS232 Can be controlled and monitored by third parties via RS232 using both the GPI pins
Output Level Adjustment Front panel potentiometer, detented from -inf to 0 dB
Audio Processing Functions Input Processing Block: Four EQ sections per input
Mix Matrix Routing Block: 4 in x 4 out mix-matrix controllable from GPI
Output Processing Block: Four EQ sections per output (presets available for many loudspeakers)
User adjustable output look ahead limiter
ADLC (Adaptive ISO 226 compensation)
Two line-level outputs: Each capable of driving 10 LUCIA devices in parallel
Latency from Any Input to Any Output: User adjustable from 9.15 to 137 ms
Cooling One fan, no filter required, front to rear airflow, temperature controlled speed
Can stay off if the sustained power average stays below 2 x 6 W and the ambient temperature is below 25 C
Auto Mode The power state is controlled automatically by the audio signal
Finish Black aluminum front and black steel chassis
Approvals CE, CSA, CCC, PSE, FCC, Energy Star
Power Nominal Voltage: 100 to 240 VAC
Operating Voltage: 85 to 265 VAC
Standby Consumption: <1 W
Mains Connector: IEC inlet
Dimensions (W × H × D) 8.5 x 1.8 x 11.0" / 216 x 44 x 280 mm
Weight 4.2 lb / 1.9 kg