• Compact amplifier which offers full output power across a range of loads with 2 x 120 W into 8, 4 or 2 Ohms
• Comprehensive on-board DSP with loudspeaker processing and innovative features which enhance performance and simplifies system design and commissioning
• Configuration software wizard for initial set-up and advanced editor for preset configuration (LUCIA connection via USB) available for Windows* and Mac*
• Energy efficient with Energy Star* certification for supreme green credentials and exceptionally low lifetime running costs
• Automatic Dynamic Loudness Contouring adapts to optimize performance at any output level
• Comprehensive DSP features with per-channel presets for high-pass filter, parametric EQ, multi-band compressor and look-ahead limiter
• Optimized presets available for a wide range of loudspeaker models for fast configuration
• Enhanced Bass Profile for extended LF response with small loudspeakers
• Proprietary Auto Load Sense automatically sets VPL (Voltage Peak Limiter) for optimum performance with any connected load
• Efficient Class-D amplifier with low distortion and minimal heat dissipation
• Compact form factor in a half-rack, 1U chassis with supplied bracket for discreet on-wall mounting

• Configurable GPIO port for remote control (e.g. wall panel) for channel switching, level control and integration with paging systems
• Comprehensive circuit protection for fail safe operation, including short circuit, thermal and under-voltage protection
• Universal power supply supports 100
  - 240 V AC at 50 or 60 Hz
• Intelligent fan control for silent operation at idle and at lower output levels
• Front panel power and fault indication as well as per-channel signal LED and attenuation knob
• Balanced high quality analog inputs and amplifier outputs on detachable screw terminals
• Parallel analogue input on unbalanced RCA connectors with optimized gain for mobile and other unbalanced sources
• Rackmount kit, pole-mount kit and wall panel kits available as accessories
• 10-Year Warranty Program*
• Designed and engineered in Sweden
  

Specs:

Number of amplifier channels
2

Max total output all channels driven
240 W

Max output voltage per channel 1
43.8 V peak

Max output current per channel
7.8 Arms

Max output power (all channels driven)

2 ohms
120 W

4 ohms
120 W

8 ohms
120 W

16 ohms
60 W

Performance

THD 20 Hz - 20 kHz at 1 W into 8 ohms
<0.3%

THD at 1 kHz and 1 dB below clipping
<0.2%

Signal to Noise Ratio
>101 dBA

Channel separation (Crosstalk) at 1 kHz
>60 dBA

Frequency Response
5 Hz - 22 kHz

Input impedance
10 kOhm

Common Mode Rejection (CMR)
40 dB

Gain, Sensitivity and Limiters

VPL for 16 ohm mode
43.8 Vpeak

VPL for 8 ohm mode
43.8 Vpeak

VPL for 4 ohm mode
31 Vpeak

VPL for 2 ohm mode
22 Vpeak

Sensitivity, balanced input
4 dBu / 1.23 Vrms

Sensitivity, RCA input
-2 dBu / 0.62 Vrms

Input headroom for clip, balanced 2
12 dBu / 3.09 Vrms

Input headroom for clip, RCA 2
6 dBu / 1.55 Vrms

Connectors and Buttons

Input connectors (per ch.)
3 - pin detachable screw terminals, electronically balanced

Input connectors (ch. 1 & 2)
Unbalanced RCA type

Output connectors (per ch.)
2 - pin detachable screw terminals

GPI (power control input) 3
2 channels of voltage sense type. 4 pins in a detachable screw terminal. Default for gain.

GPO (power state output) 3
Contact closure type, 2 pins in a detachable screw terminal Default for external monitoring of fault/protection/power off

RS232
Can be controlled and monitored by third parties via RS232 using both the GPI pins

USB
For firmware update and configuration for the matrix models

Level adjustment (per channel) 3
Front panel potentiometer, detented from -inf to 0 dB

Processing Features

Input processing block 4
4 EQ sections per input

Mix matrix routing block 4
2 in - 2 out mix-matrix controllable from GPI

Output processing block 4
4 EQ sections per output (presets available for many loudspeakers) User adjustable output look ahead limiter ADLC (Adaptive ISO 226 compensation)

Latency from any input to any output
User adjustable from 9.15 to 137 ms

Power

Nominal voltage
100 – 240 VAC

Operating voltage
85 – 265 VAC

Standby consumption
<1 W

Mains connector
IEC inlet

Cooling
One fan, no filter required, front to rear airflow, temperature controlled speed. Can stay off if the sustained power average stays below 2 × 6 W and the ambient temperature is below 25 C

Auto mode
The power state is controled automatically by the audio signal

Dimensions

Dimensions
W: 216 mm (8.5”), H: 44 mm (1 U), D: 280 mm (11”)

Weight

Weight
1.9 kg (4.2 lbs)

Finish

Finish
Black aluminum front and black steel chassis

Approvals

Approvals
CE, CSA, CCC, PSE, FCC, Energy Star